Skip to main content
Press Enter
Dwyer

MS2 Magnesense II Differential Pressure Transmitter

Monitors pressure, air velocity, & air flow

This product is no longer available. Contact us at 800-567-8686 for alternative solutions.

Have questions? We're here to help!
Have questions? We're here to help!

The Series MS2 Magnesense® II Differential Pressure Transmitter combines the proven stable piezo technology and the versatility of our original Series MS with additional features to reduce installation time and simplify ordering. Like the original Series MS, the second generation transmitter can be used as a linear pressure output or a linear velocity output with the square root extraction done in the transmitter. Additional parameters have been included to expand the square root capability to include flow measurements.

• Field selectable ranges and output signal reduce inventory and the chances of ordering an incorrect part
• BACnet® or Modbus® serial communications reduce wiring cost by daisy-chaining the transmitters
• Our integral field-upgradeable display or plug-in remote display tool save upfront material cost and allow for local viewing of measurements





 

Supported Baud Rates9600, 19200, 38400, 57600, 76800, 115200
Data Size8
ParityNone
Stop Bits1
ServiceAir and non-combustible, compatible gases
Wetted MaterialsConsult factory
Typical Accuracy±1% FS for 0.15 in w.c. (40 Pa), 0.25 in w.c. (50 Pa), 0.5 in w.c. (125 Pa), 2 in w.c. (500 Pa), 3 in w.c. (750 Pa), 5 in w.c. (1250 Pa), 10 in w.c. (2 kPa), 15 in w.c. (3 kPa), 25 in w.c. (5 kPa), 28 in w.c. (6.975 kPa); ±2% FS for 0.1 in w.c. (25 Pa), 1 in w.c. (250 Pa), and all bi-directional ranges
Stability±1% / year FSO
Temperature Limits0 to 150°F (-18 to 66°C)
Pressure Limits1 psi max., operation; 10 psi burst
Power Requirements10 to 35 VDC (2-wire), 17 to 36 VDC or isolated 21.6 to 33 VAC (3-wire)
Output Signals4 to 20 mA (2-wire), 0 to 5 VDC, 0 to 10 VDC (3-wire)
Response TimeAdjustable: 0.5 to 15 sec. time constant. Provides a 95% response time of 1.5 to 45 seconds
Zero & Span AdjustmentsDigital push buttons
Loop ResistanceCurrent Output: 0 to 1250 Ω max;
Voltage Output: Min. load resistance 1 kΩ
Current Consumption40 mA max
Display (Optional)5 digit LCD
Electrical Connections3-wire removable European style terminal block for 16 to 22 AWG
Electrical Entry1/2" NPS thread
Process Connection3/16" ID tubing (5 mm ID); Max. OD 9 mm
Enclosure RatingIP66
Mounting OrientationDiaphragm in vertical position
Weight8.0 oz (230 g)
Agency ApprovalsBTL, CE

• Duct Static Pressure in Commercial Buildings
• Filter Monitoring in Air Handler Units
• Building Pressure in Pharmaceutical-Semi-Conductor Clean Rooms
• Air Velocity/Flow in VAV Systems
 

  • Thumbnail of document Data Sheet - MS2 Magnesense II Differential Pressure Transmitter
    Download

    Data Sheet - MS2 Magnesense II Differential Pressure Transmitter

    Download
  • Thumbnail of document Manual - MS2 Magnesense II Differential Pressure Transmitter
    Download

    Manual - MS2 Magnesense II Differential Pressure Transmitter

    Download
  • Thumbnail of document Brochure - MS2 Magnesense II Differential Pressure Transmitter
    Download

    Brochure - MS2 Magnesense II Differential Pressure Transmitter

    Download
  • Thumbnail of document Manual - MS2 Magnesense II Differential Pressure Transmitter
    Download

    Manual - MS2 Magnesense II Differential Pressure Transmitter

    Download
  • Thumbnail of document Manual - MS2 Magnesense II Differential Pressure Transmitter
    Download

    Manual - MS2 Magnesense II Differential Pressure Transmitter

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more