Multifunction Process Calibrator

• Lighten up your toolbox
  - Compact calibrator replaces toolbox of single function devices
• Technician friendly operation
  - Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators.
  - Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
• Use it as a milliamp and voltage calibrator
  - Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV
  - Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV
  - Simulate 2 Wire transmitters
  - Power up transmitters and loops with built in 24 V power supply
  - Simplify HART hook ups with built in 250 ohm resistor
• Troubleshoot Loop problems
  - Quickly diagnose ground fault and current leakage with patented loop diagnostic technology(US Patent # 7,248,058)
• Calibrate directly in temperature (°C & °F)
  - The PIE 820Elite works with the instruments you use.
  - Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
  - RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
  - Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
• Checkout flow and vibration systems
  - Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, & to 20.000 kHz
• Troubleshoot loop & wiring problems
  - Beep out connections with the built-in continuity checker
• Simulate pH probes into transmitters & analyzers
  - Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV
• Measure pressure with optional pressure modules
  - 32 modules for gauge, differential, compound and absolute pressure
• Easy to read
  - Turn on the backlight & easily see the display in dark areas of the plant
• Quickly set any three outputs plus automatic stepping & ramping
  - Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch.
  - Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span.
  - Select RAMP to smoothly increase and decrease the output between Zero and Span.
  - Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
• Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures
  - Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
• Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)