OEM Probe XD3
Measures relative humidity, temperature and dew/ frost point in indoor environments and has freely scalable voltage and current outputs
The Probe can cover a wide voltage supply range and the freely selectable output signals can be used for a wide range of applications without adjustments. The XD OEM is available in different configurations (0…1/5/10 V) and has extensive settings and functions that can be configured and enabled with the ROTRONIC HygroSoft software after connecting to a PC.
• Accuracy ± 0.8 %rh / ±0.2 K at 23 °C
• Range of applications electronics. -40…85 °C / 0…100 %rh
• Supply voltage range from 5…24 VDC and freely scalable outputs
• Adjusted at 23 °C and 10, 35, 80 %rh
• Not compatible with ROTRONIC Transmitters, Dataloggers and active cables
| Humidity Sensor | ROTRONIC HYGROMER® HT-1 |
| Temperature Sensor | PT100 1/3 Class B |
| Accuracy at 23°C | ±0.8 %rh / 0.2 K |
| Resolution AirChip3000 | ˂0.02 %rh /0.01 K |
| Long-Term Long-term Stability Humidity Sensor | <1 % rH / year |
| Probe Measurement Range | -40…85 °C / 0…100%rh non-condensing |
| Electronics Operating Range | -40…85 °C / 0…100%rh non-condensing |
| Output signals (analog) | Freely scalable 0…1/5/10 V 0(4)…20mA |
| Output Signals (digital) | UART or RS-485 |
| Accuracy at 23°C Output signal | ˂1 mV(1 V) / <10mV(10V) / ˂20 uA |
| Calculation | Dew point or frost point, freely scalable |
| Power Supply | 5…16 VAC / 5…24 VDC (0…1 V) 12…16 VAC / 16…24 VDC (all Outputs) |
| Current consumption | 7 mA (typical) @ 24VDC, 0…10 V 12 mA (typical) @ 5VDC, 0…1 V |
| Humidity Adjustment | 1-point or multi-point humidity adjustment / calibration |
| Temperature Adjustment | 1-point or multi-point temperature adjustment / calibration |
| Housing | Polycarbonate |
| Filter | Polyethylene, 40 um |
| IP Protection & Fire Protection Class | IP65 / Corresponds to UL94-HB |
| Dimension | Ø 15mm x 140 mm |
View All Part Numbers