OxyTrans Oxygen Transmitter
Easy to use, accurate and economical way to measure oxygen at trace and % levels
4-20 mA Loop Powered Two Wire Oxygen Transmitter
The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.
Measuring Range
The unit will offer ranges between 0-100ppm, 0-1,000ppm, 0-10,000ppm of oxygen. 0-1% to 0-25% O2.
Sensor
The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.
Calibration
The calibration of the instrument for trace oxygen measurements in gas should be done with a known calibrated gas. The concentration can be chosen freely within the measuring range.
Flow-Through Measuring Cell in Stainless Steel
The measuring cell is modular and made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.
• A 2 wire explosion-proof in-line oxygen transmitter
• 4-20mA output
• Display: 6 digit alphanumeric with bar graph
• 5 ranges offered: 0-100 ppm, 0-1,000 ppm, 0-10,000 ppm, 0-1%, 0-25%
• Oxygen sensor: a micro fuel cell
• Easy, accessible potentiometer
| Measuring Range: | O2 PPM Range: 0-100ppm, 0-1,000ppm or 0-10,000ppm % O2 Range: 0-1% or 0-25% Range must be specified at time of ordering. |
| Calibration: | With calibrated gas, air |
| Accuracy: | ± 2% FSD T = constant ± 5% FSD 0>T>50°C |
| Resolution: | 0.1 ppm at 0-100 ppm 1 ppm at 0-1,000; 0-10,000 ppm 0.1% |
| Response Time: | 90% FSD at 25°C 0-10 ppm < 45 s 0-100 ppm < 20 s 0-1,000 ppm < 10 s |
| Operating Temperature: | 0 - 50°C |
| Pressure: | 0.1 - 1 bar |
| Signal Output: | 4 - 20 mA/DC |
| Alarm Value: | 3.8 mA (Standard) or 23mA (if desired) |
| Voltage: | 10 - 35 VDC |
| Load Range: | 100 to 750 ohm Typical: 470 ohm |
| Display: | 6 Digits, alphanumeric with bar graph |
| Oxygen Sensor: | Micro-Fuel Cell |
| Housing: | IP65 |
| Dimensions: | 120mm x 160mm x 65mm (L X H X W) |
| Weight: | 1.2kg (2.6lb) |
• Air Separators
$740.00 CAD
_01016_th.jpg)
View All Part Numbers