P2 Flow Switch

Ideal for air and post-filtered water applicatoins, with fixed set point; FDA compliant

Call Today!
800-567-8686 Normally ships in 3-4 Weeks

  Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

The compact Series P2 Flow Switch utilizes a piston-type design for both air and pure water applications. The switches have preset actuation points from 0.05 to 1.0 GPM for water and 25 CFH to 5 CFM for air. The piston design incorporates a hermetically sealed SPST magnetic reed switch. The P2 is comprised of PPE & PS (polyphenylene ether and polystyrene) housing and piston and 316 Stainless Steel spring and stop pin. All wetted parts are FDA compliant. Economical and superior design make this an excellent switch for pure water equipment, filter life monitoring, heat exchangers, and cooling applications.

• Piston design incorporates a hermetically sealed SPST magnetic reed switch
• All wetted parts are FDA compliant
• Economical design

Service Compatible liquids or gases
Wetted Materials Housing: PPE & PS (polyphenylene ether and polystyrene);
Piston: PPE & PS (polyphenylene ether and polystyrene) and epoxy;
Spring and Stop Pin: 316 SS
Temperature Limits 0F - 212F (-18C - 100C)
Pressure Limits 150 PSI (10.3 Bar) @ 70F (21C);
50 PSI (3.4 Bar) @ 212F (100C)
Switch Type SPST, N.O.
Electrical Rating 0.17 A @ 120 VAC, 0.08 A @ 240 VAC, 0.13 A @ 120 VDC, 0.06 A @ 240 VDC
Electrical Connection 22 AWG, 18 in (45.7 cm), PVC lead wires
Process Connection 1/4 in male NPT
Mounting Orientation Any position. Set points shown are based on vertical, inlet down position
Required Filtration 50 m or better
Weight 2 oz (0.06 kg)
Agency Approval CE

• Pure water equipment
• Filter life monitoring
• Heat exchangers
• Cooling applications