P3100 / P3200 / P3800 Hydraulic Deadweight Testers
Used to calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or pressure switches
The P3100, P3200,a dn P3800 Series are the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadweight testers can be used to calibrate virtually any pressure sensing device, including transducers, transmitters, gauges, pressure switches, or other calibrators.
The P3100 and 3200 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in PSI, bar, kgf/cm2, and MPa. The P3800 Model offers three high pressure ranges (in PSI, bar, and MPa), and is an accurate and economical approach to calibrating high pressure devices.
These robust instruments are highly accurate, quick and easy to use.
The piston/cylinder assemblies are manufactured to the very highest standards with certified accuracies traceable to international standards laboratories such as the National Institute of Standards and Technology (NIST).
P3100 and P3200:
• Pressure ranges to 10,000 PSI (Water) or 20,000 PSI (Oil)
• 0.015% of reading accuracy standard (0.008% optional)
• Single or dual piston formats
• Built-in hand pumps standard
• Mounted spirit level with adjustable feet
• Units can be trimmed to local gravity FOC
P3800:
• Pressure ranges to 60,000 PSI (4000 bar)
• Select from two accuracy classes; 0.02% or 0.015% of reading
• Includes hand pump and intensifier for generating high pressures
• Tungsten carbide piston and cylinder provides long term stability and durability
• Mass set can be trimmed to local gravity FOC
| Pressure Range | P3100: Ranges to 20,000 PSI (1400 bar) (oil operated) P3200: Ranges to 10,000 PSI (700 bar) (distilled water operated) P3830: 500 - 30,000 PSI, or 40 - 2,000 bar, or 4 - 200 MPa, or 40 - 2000 kgf/cm2 P3840: 500 - 40,000 PSI, or 40 - 2,600 bar, or 4 - 260 MPa, or 40 - 2600 kgf/cm2 P3850: 500 - 60,000 PSI, or 40 - 4,000 bar, or 4 - 400 MPa, or 40 - 4000 kgf/cm2 |
| Accuracy | P3100 / P3200: +/- 0.015% of reading (+/- 0.008% optional) P3800: Standard accuracy is 0.02% of Reading*. Optional accuracy of 0.015% of Reading is available. |
| Standard Weight Material | Series 3 non-magnetic austenitic stainless steel |
| Weight Density | 7.8 g/cm3 |
| Optional Fractional Weights | P3100 / P3200: Solution heat treated aluminum P3800: N/A |
| Fractional Weights Weight Density | P3100 / P3200: 2.7 g/cm3 P3800: N/A |
| Piston Material | Tungsten carbide with nickel binder Density: 15.0 g/cm3 |
| Cylinder Material | P3100 / P3200: Hardened martensitic steel Tungsten carbide (water above 500 psi, 35 bar) P3800: Tungsten Carbide with cobalt binder |
| Thermal Coefficients of Expansion | P3100: Oil piston/cylinder 16.5 ppm/°C P3200: Water (above 500 PSI, 35 bar) 11 ppm/°C P3800: 11 ppm/°C |
| Test Port Adaptors | P3100 / P3200: 1/8, 1/4, 3/8 and 1/2 NPT or BSP P3800: 9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP & 3/4 BSP |
| Instrument Weight | P3100 / P3200: 36 lbs (16 kg) P3800: 66 lbs. (30 Kg) Instrument Base only |
| Instrument Size (W x D x H) | P3100 / P3200: 17.5 in x 12 in x 8.5 in (440 mm x 300 mm x 215 mm) P3800: 18 in. X 13.5 in. X 19 in. (455 X 340 X 478 mm) |
| Mass Set Weight (Typical) | P3100 / P3200: 80 lbs (36 kg) P3800: N/A |
| Reservoir Volume | P3100 / P3200: 150 cc P3800: 235 cc (14.3 cu in.) |
| Screw Press Displacement | P3100 / P3200: 5.5 cc P3800: N/A |
| Pump Displacement | P3100 / P3200: 4.7 cc per stroke P3800: N/A |
| Seal Materials | P3100 / P3200: (O-Ring) Buna N as standard, Viton and EPDM available P3800: Nitrile |
| Minimum Standard Weight Increments | Up to 500 PSI (35 bar): 1 PSI (0.1 bar) 500 - 5000 PSI (35 - 350 bar): 10 PSI (1 bar) 5000 - 20,000 PSI (350 - 1400 bar): 20 PSI (2 bar) Model P3112: 1 PSI (0.1 bar) |
| Optional Fractional Weights (for P3100 / P3200) | Up to 500 PSI (35 bar): 0.1 PSI (0.01 bar) 500 - 5000 PSI (35 - 350 bar): 1 PSI (0.1 bar) 5000 - 20,000 PSI (350 - 1400 bar): 2 PSI (0.2 bar) |
| Operating Fluids | P3100: Mineral Oil (Shell spindle oil 22, our reference 55-655, viscosity 40 cs @ 20°C) P3200: Distilled or deionized water P3800: Dioctyl Sebacate (DOS), our reference 55-600 |
| Fluke Calibration P3100 / P3200 / P3800 Hydraulic Deadweight Testers - P3100 / P3200 Data Sheet 2.1 MB |
| Fluke Calibration P3100 / P3200 / P3800 Hydraulic Deadweight Testers - P3800 Data Sheet 1.8 MB |
| Fluke Calibration P3100 / P3200 / P3800 Hydraulic Deadweight Testers - P3100 / P3200 Manual 1.6 MB |
| Fluke Calibration P3100 / P3200 / P3800 Hydraulic Deadweight Testers - P3800 Manual 1.5 MB |
| Fluke Calibration P3100 / P3200 / P3800 Hydraulic Deadweight Testers - P3100 / P3200 Manual Supplement 277.2 KB |
$5,053.00 CAD
$2,867.00 CAD