Precision Digital

PD2-6310 Helios Pulse Input Batch Controller

For Batch controlling using a pulse output flowmeter, huge display, IP65 rated field mountable enclosure

Starting At
$1,659.15 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

What sets the Helios apart from other Large Display Meters is its dual line display with super bright LEDs that can be read even in bright sunlight and up to 100 feet away. Based on Precision Digital's popular line of ProVu® digital panel meters, the Helios can satisfy a wide variety of level, flow, temperature, pressure, & weight applications. It is available with models that accept 4-20 mA, thermocouple, RTD, pulse, strain gauge, AC and DC volts and current, and even Modbus®.

Go with the Helios PD2-6310 when you need to do batch controlling using a pulse output flowmeter. The PD2-6310's huge display means operators don't have to be close up to the instrument to monitor the status of the batching application. And its IP65 rated field mountable enclosure allows the PD2-6310 to be mounted in wet, dusty, and dirty areas. The PD2-6310 can handle single and multi-stage batching applications.

Input

Pulse, Open Collector, NPN, PNP, TTL, Switch Contact, Sine Wave (Coil), Square Wave

Helios Features

• Large 1.80" Digits
• Dual Line Display
• Six Full Digits on Each Line
• Readable From 100 Feet Away
• Superluminous Sunlight Readable Display
• IP65 Rated Field Mountable Enclosure
• Great for Outdoor Use: -40 to 150°F (-40 to 65°C)
• Program the Meter from a PC with Onboard USB and MeterView® Pro

PD2-6310 Features


• 5, 10, or 24 V Flowmeter Power Supply
• K-Factor, Internal Scaling, or External Calibration
• Start, Batch, Pause, & Stop with Front Panel Buttons
• Display Batch Total + Rate, Grand Total, Batch Count or Preset
• Single or Multi-Stage Batching with up to 8 Relays
• Automatic Overflow Protection
• Manual Control or Automatic Batching
• 32-Point Linearization
• On-board Digital Input (for Remote Reset)
• Count Up or Down, Total & Grand Total

Display Two lines with 1.8" (46 mm) high digits, red LEDs; 6 digits per line (-99999 to 999999), with lead zero blanking
Display Intensity Eight user selectable intensity levels
Display Update Rate 5/second (200 ms)
Over Range Display flashes 999999
Under Range Display flashes -99999
Display Assignment Display lines 1 & 2 may be assigned to rate, total, grand total, batch count, preset, set points, units (lower display only), alternating R & T, R & GT, preset & rate, max & min, or a Modbus display register. Any rate/total/grand total display may be programmed to alternate with a custom unit or tag.
Programming Methods Four programming buttons, digital inputs, PC and MeterView Pro software, or Modbus registers.
Noise Filter Programmable from 2 to 199 (0 will disable filter)
Filter Bypass Programmable from 0.1 to 99.9% of calibrated span
Recalibration All ranges are calibrated at the factory. Recalibration is recommended at least every 12 months.
Max/Min Display Max/min readings reached by the process are stored until reset by the user or until power to the meter is turned off.
Password Three programmable passwords restrict modification of programmed settings.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and editing set/reset points
Pass 3: Restricts all programming, function keys, and digital inputs.
Power Options 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max or 12-24 VDC 10%, 15 W max. Powered over USB for configuration only.
Isolated Transmitter Power Supply Terminals P+ & P-: 24 VDC 10%. 12-24 VDC powered models selectable for 24, 10, or 5 VDC supply (internal P+/P- switch). 85-265 VAC models rated @ 200 mA max, 12-24 VDC powered models rated @ 100 mA max, @ 50 mA max for 5 or 10 VDC supply.
Non-Volatile Memory All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Fuse Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse
Normal Mode Rejection Greater than 60 dB at 50/60 Hz
Isolation 4 kV input/output-to-power line; 500 V input-to-output or output-to-P+ supply
Overvoltage Category Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.
Environmental Operating temperature range: -40 to 150F (-40 to 65C); Storage temperature range: -40 to 185F (-40 to 85C); Relative humidity: 0 to 90% non-condensing
Connections Removable and integrated screw terminal blocks accept 12 to 22 AWG wire.
Enclosure UL Type 4X, IP65 rated. Polycarbonate & glass blended plastic case, color: gray. Includes four PG11 through-hole conduit openings, with two factory installed PG11, IP68, black nylon threaded hole plugs with backing nuts.
Wall Mounting Four (4) mounting holes provided for mounting meter to wall.
Pipe Mounting Optional pipe mounting kit (PDA6260) allows for pipe mounting. Sold separately.
See PD2-6310 manual for instructions.
Tightening Torque Removable Screw Terminals: 5 lb-in (0.56 Nm)
Digital I/O and RS485 Terminals 2.2 lb-in (0.25 Nm)
Overall Dimensions (H x W x D) 10.63" x 12.59" x 4.77" (270 mm x 319.7 mm x 121.2 mm)
Weight 6.10 lbs (2.76 kg)
UL File Number UL & C-UL Listed. E160849; 508 Industrial Control Equipment.
USB Connection Compatibility: USB 2.0 Standard, Compliant
Connector Type: Micro-B receptacle
Cable: USB A Male to Micro-B Cable
Driver: Windows 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit, Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
Power: USB Port
Warranty 3 years parts & labor

Item
Description
Availability
Price
PDA6260 Helios Pipe Mounting Kit
Helios pipe mounting kit zinc plated steel
Normally ships in 1-2 Weeks
$139.05 CAD
PDAPLUG2 Conduit Plug
Helios plastic conduit plug
Normally ships in 1-2 Weeks
$52.65 CAD
PDA0004 Cable Gland
Cable gland for Helios large display meter
Normally ships in 1-2 Weeks
$13.50 CAD


Chat Live