COVID-19 Update: Alpha Controls & Instrumentation is here to help and support your business in anyway possible during these uncertain times. Please click here to read more.

Precision Digital

PD6080 ProVu Decimal Display Modbus Scanner

Multi-purpose decimal display and controller, scans up to 16 Modbus process variables and accepts two analog process inputs

Starting At
$919.00 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

The ProVu PD6080 Super Snooper Modbus® scanner is a multi-purpose display and controller capable of scanning up to 16 Modbus process variables and accepts two analog process inputs. The scanner can be programmed as a Modbus RTU master, slave, or snooper. It is the ideal display for Modbus multivariable transmitters or for existing Modbus networks with transmitters in need of an easy-to-read and conveniently located remote display. As a master, the PD6080 can read up to 16 Modbus registers on up to 16 Modbus devices and automatically alternate each of these process variables (PVs) on the dual-line display along with a unit and tag for each. In snooper mode, the PD6080 can read any Modbus variable being polled by a master, which allows you to easily add a display into an existing Modbus network. Like all ProVu meters, the PD6080 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. Powerful math functions may be applied to the analog or Modbus inputs, such as addition, difference, average, and ratio.

     

• Modbus® RTU Master, Slave, or Snooper Mode
• Poll and Display up to 16 Process Variables
• Large Dual-Line 6-Digit Display, 0.60" & 0.46"
• SunBright Display Standard
• 32-Point, Square Root, or Exponential Linearization
• Addition, Difference, Average, Multiplication, Division, Min, Max, Weighted Average, Ratio, Concentration, & More
• Type 4X, NEMA 4X, IP65 Front
• Universal 85-265 VAC, or 12-24 VDC Input Power Models
• 12-36 VDC/12-24 VAC Power Option
• Onboard USB and ScanView Programming Software

Input/Output Modbus RTU over RS-485, Two analog inputs (4-20 mA, ±10 V)
Display Upper display: 0.60" (15 mm) high. Lower display: 0.46" (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs
Display Intensity Eight user selectable intensity levels
Display Scan Rate Master/Snooper: 1/second to once every 99.9 seconds. Slave: Dependent on master device (e.g. PLC)
Over Range Display flashes 999999
Under Range Display flashes -99999
Display Assignment The top display may be assigned to PV (process values), Ch C (math channel), PV & units, tag & PV, tag-PV-units, C & units, tag-C-unit, Set point 1-8, max/min PV, max/min C. The bottom display may be assigned to all of the above, tag, or off. The tag and units are displayed alternately for 2 sec, when selected. Different tags & PVs may be selected to display on the top and bottom displays at the same time.
Front Panel NEMA 4X, IP65
Programming Methods Four front panel buttons, digital inputs, PC and MeterView Pro software, Modbus registers
F4 Digital Input Contacts 3.3 VDC on contact. Connect normally open contacts across F4 to COM.
F4 Digital Input Logic Levels Logic High: 3 to 5 VDC
Noise filter Programmable from 2 to 199 (0 will disable filter)
Filter Bypass Programmable from 0.1 to 99.9% of calibrated span
Recalibration All ranges are calibrated at the factory. Recalibration is recommended at least every 12 months.
Max/Min Display Max (Peak) / min (Valley) readings reached by the process are stored until reset by the user or until power to the meter is cycled.
Password Three programmable passwords restrict modification of programmed settings.
Non-Volatile Memory All programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
Power Options 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max or 12-24 VDC ± 10%, 15 W max. Powered over USB for configuration only.
Fuse Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse.
Isolated Transmitter Power Supply Terminals P+ & P-: 24 VDC ± 10%. 12-24 VDC powered models selectable for 24, 10, or 5 VDC supply (internal P+/P- switch). 85-265 VAC models rated @ 200 mA max, 12-24 VDC powered models rated @ 100 mA max, @ 50 mA max for 5 or 10 VDC supply.
Normal Mode Rejection Greater than 60 dB at 50/60 Hz
Isolation 4 kV input/output-to-power line. 500 V input-to-output or output-to-P+ supply.
Overvoltage Category Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.
Environmental Operating temperature range: -40 to 65°C
Storage temperature range: -40 to 85°C
Relative humidity: 0 to 90% non-condensing
Connections Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
Enclosure 1/8 DIN, high impact plastic, UL 94V-0, color: black
Mounting 1/8 DIN panel cutout required: 3.622" x 1.772" (92 mm x 45 mm). Two panel mounting bracket assemblies are provided.
Tightening Torque Screw terminal connectors: 5 lb-in (0.56 Nm)
Overall Dimensions (W x H x D) 4.68" x 2.45" x 5.64" (119 mm x 62 mm x 143 mm)
Weight 9.5 oz (269 g)
UL File Number UL & c-UL Listed. E160849; 508 Industrial Control Equipment.
USB Connection Compatibility: USB 2.0 Standard, Compliant
Connector Type: Micro-B receptacle
Cable: USB A Male to Micro-B Cable
Driver: Windows 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit,
Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
Power: USB Port
Warranty 3 years parts & labor

Item
Description
Availability
Price
Accessories
PDX6901 Snubber Flexible Leads
Snubber 0.01μF/470Ω flexible leads
Normally ships in 1-2 Weeks
$15.00 CAD
Converters
PDA7485 Converter
RS-232 to RS-422/485 converter
Normally ships in 1-2 Weeks
$268.50 CAD
PDA8485 Converter
USB to RS-485 Converter
Normally ships in 1-2 Weeks
Starting At
$246.00 CAD
Configure
Expanision Modules
PDA1004 Expansion Module
ProVu 4 relays expansion module
Normally ships in 1-2 Weeks
$124.50 CAD
PDA1011 ProVu Expansion Module
Adds an additional two (2) analog outputs to any dual-input ProVu meter or ProVu Modbus® scanner
Normally ships in 1-2 Weeks
$148.50 CAD
Mounting Kits
PDA1002 ProVu Mounting Kit
ProVu DIN rail mounting kit for two modules
Normally ships in 1-2 Weeks
$19.50 CAD
Option Cards
ProVU Option Cards
Option upgrade cards for the ProVu series
Normally ships in 1-2 Weeks
Starting At
$75.00 CAD
Configure