Precision Digital

PD6089 ProVu Feet & Inches Modbus Scanner

Displays level information on a feet & inches display, scans up to 16 Modbus process variables

Starting At
$903.15 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

The ProVu PD6089 Super Snooper feet & inches Modbus® scanner displays level information on a specially designed feet & inches display, instead of the usual decimal format. It is the ideal display for Modbus level or multivariable transmitters and is capable of scanning up to 16 Modbus process variables. Its unique feet & inches upper LED display can indicate up to 99 feet, 11 and 15/16 inches. The 6-digit lower display can indicate units, tags, or other variables such as volume, temperature, or density. The PD6089 can function as a Modbus master, slave, or snooper. Like all ProVu meters, the PD6089 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. Various math functions may be applied to the analog or Modbus inputs, such as addition, difference, average, and ratio.

     

• Modbus® RS-485 RTU Serial Communications as Master, Slave, or Snooper
• RS-485 Serial Communications Standard
• Displays Level Information in Feet & Inches
• Scan up to 16 Modbus Process Variables
• Addition, Difference, Average, Multiplication, Division, Min, Max, Weighted Average, Ratio, Concentration, & More
• Large Dual-Line 6-Digit Display, 0.60" & 0.46"
• Sunlight Readable Display Standard
• NEMA 4X, IP65 Front
• Universal 85-265 VAC, or 12/24 VDC Input Power Models
• Onboard USB and ScanView Programming Software

Input/Output Modbus RTU over RS-485
Display Upper display: 0.60" (15 mm) high. Lower display: 0.46" (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs
Display Intensity Eight user selectable intensity levels
Display Scan Rate Master/Snooper: 1/second to once every 99.9 seconds. Slave: Dependent on master device (e.g. PLC)
Over Range Display flashes 999999
Under Range Display flashes -99999
Display Assignment The top display may be assigned to PV (process values), Ch C (math channel), PV & units, tag & PV, tag-PV-units, C & units, tag-C-unit, Set point 1-8, max/min PV, max/min C. The bottom display may be assigned to all of the above, tag, or off. The tag and units are displayed alternately for 2 sec, when selected. Different tags & PVs may be selected to display on the top and bottom displays at the same time.
Front Panel NEMA 4X, IP65
Programming Methods Four front panel buttons, digital inputs, PC and MeterView Pro software, Modbus registers
F4 Digital Input Contacts 3.3 VDC on contact. Connect normally open contacts across F4 to COM.
F4 Digital Input Logic Levels Logic High: 3 to 5 VDC
Noise filter Programmable from 2 to 199 (0 will disable filter)
Filter Bypass Programmable from 0.1 to 99.9% of calibrated span
Recalibration All ranges are calibrated at the factory. Recalibration is recommended at least every 12 months.
Max/Min Display Max (Peak) / min (Valley) readings reached by the process are stored until reset by the user or until power to the meter is cycled.
Password Three programmable passwords restrict modification of programmed settings.
Non-Volatile Memory All programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
Power Options 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max or 12-24 VDC ± 10%, 15 W max. Powered over USB for configuration only.
Fuse Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse.
Normal Mode Rejection Greater than 60 dB at 50/60 Hz
Isolation 4 kV input/output-to-power line. 500 V input-to-output or output-to-P+ supply.
Overvoltage Category Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.
Environmental Operating temperature range: -40 to 65°C
Storage temperature range: -40 to 85°C
Relative humidity: 0 to 90% non-condensing
Max Power Dissipation PD8 Series: Maximum power dissipation limited to 15.1 W. See PD8 instruction manual for additional details.
Connections Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
Enclosure 1/8 DIN, high impact plastic, UL 94V-0, color: black
Mounting 1/8 DIN panel cutout required: 3.622" x 1.772" (92 mm x 45 mm). Two panel mounting bracket assemblies are provided.
Tightening Torque Screw terminal connectors: 5 lb-in (0.56 Nm)
Overall Dimensions (W x H x D) 4.68" x 2.45" x 5.64" (119 mm x 62 mm x 143 mm)
Weight 9.5 oz (269 g)
UL File Number UL & c-UL Listed. E160849; 508 Industrial Control Equipment.
USB Connection Compatibility: USB 2.0 Standard, Compliant
Connector Type: Micro-B receptacle
Cable: USB A Male to Micro-B Cable
Driver: Windows 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit,
Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
Power: USB Port
Warranty 3 years parts & labor

Item
Description
Availability
Price
Converters
PDA7485 Converter
RS-232 to RS-422/485 converter
Normally ships in 1-2 Weeks
$241.65 CAD
PDA8485 Converter
USB to RS-485 Converter
Normally ships in 1-2 Weeks
Starting At
$221.40 CAD
Configure
Expanision Modules
PDA1004 Expansion Module
ProVu 4 relays expansion module
Normally ships in 1-2 Weeks
$112.05 CAD
PDA1011 ProVu Expansion Module
Adds an additional two (2) analog outputs to any dual-input ProVu meter or ProVu Modbus® scanner
Normally ships in 1-2 Weeks
$133.65 CAD
PDA1044 ProVu Digital I/O Expansion Module
Adds four digital inputs and four digital outputs to any ProVu meter
Normally ships in 1-2 Weeks
$48.60 CAD
Mounting Kits
PDA1002 ProVu Mounting Kit
ProVu DIN rail mounting kit for two modules
Normally ships in 1-2 Weeks
$17.55 CAD
PDA6901 Pipe Mounting Kit
2" pipe mounting kit for PDA2901
Normally ships in 1-2 Weeks
$139.05 CAD
Option Cards
ProVU Option Cards
Option upgrade cards for the ProVu series
Normally ships in 1-2 Weeks
Starting At
$67.50 CAD
Configure


Chat Live