PD6100 ProVu Strain Gauge, Load Cell & mV Digital Panel Meter

1/8 DIN, accepts strain gauge & load cell inputs and mV signals up to 300 mV (unipolar) and ± 250 mV (bipolar) for weight indication and force measurement applications

Buy now!

$748.50CAD

Have questions? We're here to help!

Call

QTY

Used in

PD6100 Pro Vu Strain Gauge Load Cell m V Digital Panel Meter 00703 dm1746721379

The PD6100 is a member of the ProVu series of 1/8 DIN digital panel meters that accepts strain gauge & load cell inputs and mV signals up to 300 mV (unipolar) and ± 250 mV (bipolar) for weight indication and force measurement applications. With a max output current of 350 mA at 10 V, it can support up to twelve (12) 350 Ω load cells (minimum load resistance of 28 Ω), making it ideal for multipoint weight measurement applications. The PD6100's dual-line display and powerful dual-scale capability allows the measurement to be displayed in two different units of measure; gallons (volume) could be displayed on the upper line while pounds (weight) is displayed on the lower line, for example. Another use for the PD6100's dual-line display is to simply show the units of measure on the bottom line. The PD6100 stain gauge meter includes a 24 VDC power supply to drive the sensors and can be equipped with up to four internal relays and two 4-20 mA outputs.

• 15, 30, 150, 300 mV Unipolar Input Ranges
• ±15, ±25, ±150, ±250 mV Bipolar Input Ranges
• Selectable 5 or 10 VDC Sensor Excitation
• Supports up to twelve (12) 350 Ω Load Cells (Minimum Load Resistance of 28 Ω)
• Capture or Programmable Tare Feature
• Auto-Zero Feature Eliminates Zero Drift
• Ratiometric Operation
• Max/Min or Peak/Valley Hold Feature
• Dual-Scale Feature – Single Input
• Rounding Function 1, 2, 5, 10, 20, 50, or 100
• Programmable Display & Function Keys
• USB, RS-232, & RS-485 Serial Communication Options
• Modbus RTU Communication Protocol Standard
• Optional SunBright Display Models for Outdoor Applications
• Onboard USB and MeterView® Pro Programming Software

Display	Upper display: 0.60" (15 mm) high. Lower display: 0.46" (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs.
Display Intensity	Eight intensity levels
Display Update Rate	5/second (200 ms)
Over Range	Display flashes 999999
Under Range	Display flashes -99999
Display Assignment	The displays may be assigned to PV1, PV2, PCT, max & min, set points, PV & units, units (lower display only), net & gross weight, Modbus input, and display millivolts.
Units	lb, kg, ounce, gram, ton, metric ton (tonne), custom units.
Front Panel	NEMA 4X, IP65
Programming Methods	Four front panel buttons, digital inputs, PC and MeterView Pro software, Modbus registers
F4 Digital Input Contacts	3.3 VDC on contact. Connect normally open contacts across F4 to COM.
F4 Digital Input Logic Levels	Logic High: 3 to 5 VDC Logic Low: 0 to 1.25 VDC
Noise filter	Programmable from 2 to 199 (0 will disable filter)
Filter Bypass	Programmable from 0.1 to 99.9% of calibrated span
Rounding	Select 1, 2, 5, 10, 20, 50, or 100 (e.g. rounding = 10, value = 123.45, display = 123.50).
Recalibration	All ranges are calibrated at the factory. Recalibration is recommended at least every 12 months.
Max/Min Display	Max/min readings reached by the process are stored until reset by the user or until power to the meter is cycled.
Password	Three programmable passwords restrict modification of programmed settings.
Non-Volatile Memory	All programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
Power Options	85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max, or optional model with 12-24 VDC ±10%, 15 W max.
Fuse	Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse.
Isolated Sensor Power Supply	Terminals Ex+ & Ex-: 10 VDC or 5 VDC ± 10%. Rated @ 350 mA max. Note: Do not use 24 VDC to power strain gauge bridge
Normal Mode Rejection	Greater than 60 dB at 50/60 Hz
Isolation	4 kV input/output-to-power line. 500 V input-to-output (powered by external supply).
Overvoltage Category	Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.
Environmental	Operating temperature range: -40 to 65°C
Storage temperature range	-40 to 85°C
Relative humidity	0 to 90% non-condensing
Connections	Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
Enclosure	1/8 DIN, high impact plastic, UL 94V-0, color: black
Mounting	1/8 DIN panel cutout required: 3.622" x 1.772" (92 mm x 45 mm). Two panel mounting bracket assemblies are provided.
Tightening Torque	Screw terminal connectors: 5 lb-in (0.56 Nm)
Dimensions (W x H x D)	4.68" x 2.45" x 5.64" (119 mm x 62 mm x 143 mm)
Weight	9.5 oz (269 g)
UL File Number	UL & C-UL Listed. E160849; 508 Industrial Control Equipment.
USB Connection	Compatibility: USB 2.0 Standard, Compliant Connector Type: Micro-B receptacle Cable: USB A Male to Micro-B Cable Driver: Windows 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit, Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit Power: USB Port
Warranty	3 years parts & labor

Download
Data Sheet - PD6100 ProVu Strain Gauge, Load Cell & mV Digital Panel Meter
Download
Download
Manual - PD6100 ProVu Strain Gauge, Load Cell & mV Digital Panel Meter
Download
Download
Software - PD6100 ProVu Strain Gauge, Load Cell & mV Digital Panel Meter
Download