Precision Digital

PD6310-WM ProVu NTEP Approved Batch Controller

Pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.), designed for single and multi-stage batching applications

Starting At
$1,011.00 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

The ProVu PD6310-WM is an NTEP® certified, pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller specifically designed for single and multi-stage batching applications which has been certified as a Weighing and Measuring device. These versatile NTEP certified batch controllers provide excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. This Weights and Measures approved batch controller is equipped with a mechanically secured, tamper-proof, programming lockout feature. This consists of a cable with a compression seal that is used to prevent access to a programming lockout jumper. Like all ProVu meters, the PD6310 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

          
 

• Pulse, Open Collector, NPN, PNP, TTL, Switch Contact, Sine Wave (Coil), Square Wave Inputs
• Dual-Line 6-Digit Display, 0.60" & 0.46" Height
• SunBright Sunlight Readable Display
• Universal 85-265 VAC or 12/24 VDC Input Power
• 5, 10, or 24 VDC Flowmeter Power Supply
• 2 or 4 Relays + Isolated 4-20 mA Output Options
• Program and Control with a Computer Using MeterViewPro Software
• Modbus® RTU Communication Protocol Standard
• K-Factor, Internal Scaling or External Calibration
• Single or Multi-Stage Batch Control(Up to 8 Relays)
• Automatic or Manual Batch Control
• Start / Pause / Stop, Change Batch with Front Panel Buttons
• Automatic Overrun Correction
• Count Up or Down with Each Batch
• Display Batch Total, Rate, Grand Total, Count or Preset
• Rate in Units per Second, Minute, Hour, or Day
• 9-Digit Grand Total with Overflow Feature
• Low or High Flow Alarms while Batching
• Standard 1/8 DIN Mounting
• NEMA 4X, IP65 Front
• Onboard USB and MeterView® Pro Programming Software

Display Upper display: 0.60" (15 mm) high. Lower display: 0.46" (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs. Both are 6 digits (-99999 to 999999), red LEDs, with lead zero blanking.
Default Display Assignment The upper display shows batch total. The lower display shows rate with alternating units, and can be switched to show grand total, batch count, or preset with the STOP key.
Custom Display Assignment The upper and lower displays may be assigned to rate, total, grand total, batch count, preset, set points, units (lower display only), alternating R & T, R & GT, preset & rate, max & min, or a Modbus display register. Any rate/total/grand total display may be programmed to alternate with a custom unit or tag.
Alternating Display Displays alternate every 10 seconds when display is selected or the batch is paused.
Display Intensity Eight user-selectable intensity levels
Display Update Rate 5/second (200 ms)
Over Range Display flashes 999999
Under Range Display flashes -99999
Front Panel NEMA 4X, IP65
Operating Methods Three programmable front panel buttons (default START, BATCH, STOP), digital inputs, PC and MeterView Pro software, and Modbus registers.
Programming Methods Four front panel buttons, digital inputs, PC and MeterView Pro software, Modbus registers.
F4 Digital Input Contacts 3.3 VDC on contact. Connect normally open contacts across F4 to COM.
F4 Digital Input Logic Levels Logic High: 3 to 5 VDC Logic Low: 0 to 1.25 VDC
Noise Filter Programmable from 2 to 199 (0 will disable filter)
Filter Bypass Programmable from 0.1 to 99.9% of calibrated span.
Recalibration Recommended at least every 12 months.
Max/Min Display Max (Peak) / min (Valley) readings reached by the process are stored until reset by the user or until power is cycled.
Password Three programmable passwords restrict modification of programmed settings and two prevent resetting the totals.
Non-Volatile Memory All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Power Options 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max or 12-24 VDC 10%, 15 W max. Powered over USB for configuration only.
Fuse Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 batch controllers may share one 5 A fuse.
Isolated Transmitter Power Supply Terminals P+ & P-: 24 VDC 10%. 12-24 VDC powered models selectable for 24, 10, or 5 VDC supply (internal P+/P- switch). 85-265 VAC models rated @ 200 mA max, 12-24 VDC powered models rated @ 100 mA max, @ 50 mA max for 5 or 10 VDC supply.
Normal Rejection Mode Greater than 60 dB at 50/60 Hz
Isolation 4 kV input/output-to-power line. 500 V input-to-output or output-to-P+ supply.
Overvoltage Category Installation Overvoltage Category II: Local level with smaller transient overvoltages than Installation Overvoltage Category III.
Environmental Operating temperature range: -40 to 65C
Storage temperature range: -40 to 85C
Relative humidity: 0 to 90% non-condensing
Connections Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
Enclosure 1/8 DIN, high impact plastic, UL 94V-0, color: black
Mounting 1/8 DIN panel cutout required: 3.622" x 1.772" (92 mm x 45 mm).
Weight 9.5 oz. (269 g)
Dimensions (W x H x D) 4.68" x 2.45" x 5.64" (119 mm x 62 mm x 143 mm)
UL File Number UL & c-UL Listed. E160849; 508 Industrial Control Equipment.
USB Connection Compatibility: USB 2.0 Standard, Compliant
Connector Type: Micro-B receptacle
Cable: USB A Male to Micro-B Cable
Driver: Windows 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit,
Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
Power: USB Port
Warranty 3 years parts & labor

Item
Description
Availability
Price
Accessories
PDX6901 Snubber Flexible Leads
Snubber 0.01μF/470Ω flexible leads
Normally ships in 1-2 Weeks
$14.00 CAD
Adapter/USB
PDA1232 ProVu RS-232 Serial Adapter
Converts the serial output of the ProVu meter to an unbalanced, full-duplex RS-232 signal
Normally ships in 1-2 Weeks
$114.80 CAD
PDA1485 ProVu RS-485 Serial Adapter
Converts the serial output of the ProVu meter to an unbalanced, full-duplex RS-232 signal
Normally ships in 1-2 Weeks
$114.80 CAD
Converters
PDA7485 Converter
RS-232 to RS-422/485 converter
Normally ships in 1-2 Weeks
$250.60 CAD
PDA8232-N Converter
USB to RS-232 Converter
Normally ships in 1-2 Weeks
$71.40 CAD
PDA8485 Converter
USB to RS-485 Converter
Normally ships in 1-2 Weeks
Starting At
$229.60 CAD
Configure
Expanision Modules
PDA1004 Expansion Module
ProVu 4 relays expansion module
Normally ships in 1-2 Weeks
$116.20 CAD
PDA1044 ProVu Digital I/O Expansion Module
Adds four digital inputs and four digital outputs to any ProVu meter
Normally ships in 1-2 Weeks
$50.40 CAD
Mounting Kits
PDA1002 ProVu Mounting Kit
ProVu DIN rail mounting kit for two modules
Normally ships in 1-2 Weeks
$18.20 CAD
Option Cards
ProVU Option Cards
Option upgrade cards for the ProVu series
Normally ships in 1-2 Weeks
Starting At
$70.00 CAD
Configure