The Vantageview PD6730X is a plastic, field-mounted, RS485 serial input Modbus® RTU scanner capable of scanning up to 16 Modbus variables and displaying them on an easy-to-read, dual-line, LCD display. It can be programmed as a Modbus RTU master, slave, or snooper. The PD6730X is available in two upper display line configurations: 5-digit decimal display and feet & inches display with bar graph. The lower line is the same for both versions and consists of seven alphanumeric characters. Two features that really make the PD6730X stand out are its wide viewing angle display and SafeTouch® through-window buttons. These buttons allow the PD6730X to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.
• Modbus Master, Slave, or Snooper Mode
• Scan up to 16 Modbus Process Variables
• 5-Digit Decimal or Feet & Inches Level Display
• On-Board Three-Wire RS-485 with Modbus
• Independent Scaling, Tag, and Unit for Each PV
• 7 Alphanumeric Character 0.4" (10.2 mm) Lower Display for Process Variables, Custom Units, and Tags
• Injection-Molded, IP65, NEMA 4X Enclosure
• SafeTouch® Through-Window Button Programming
• Isolated 4-20 mA Output Option
• Pulse Input for Rate, Total, and Grand Total
• 13-Digit Totalizer with Total Overflow Feature
• Password Protection
• Backlight Standard on All Models
• Automatic Rate, Total, and Grand Total Unit Conversions
• Operates from -40 to 75°C
• Data Logging Functions and Modbus Accessible Data
• Two Isolated Pulse Outputs Standard, Up to 5 kHz
|Decimal Display||Top Display: Five Digits (0 to 99999), 0.7" (17.8 mm) high, 7-segment, automatic lead zero blanking.
Bottom Display: Seven Characters, 0.4" (10.2 mm) high, 14-segment, automatic lead zero blanking.
Symbols: Total, grand total, high alarm, low alarm, SafeTouch button sleep mode/disable, password lock.
|Feet & Inches Display||Top Display: 0.60" (15.2 mm) high, 0 to 399FT, 11 and 15/16 IN, 7-segment, programmable 1/16 or 1/8 fraction display.
Bottom Display: Seven Characters, 0.4" (10.2 mm) high, 14-segment, 7-digits.
Tank Level Indicator: 20-segments, F (Full) and E (Empty).
Alarm Indication: High and low alarm
|Display Assignment||Top and Bottom Display*: Process Variables (PV); Alternating PV and Units, Tag and PV, or Tag, PV, and Units; Pulse Input Rate, Total, or Grand Total with Alternating Tag.
Bottom Display: All Top Display Options or Off
Units and tag independent for each PV, pulse input rate, total, and grand total.
|Backlight||White LED, 10 sec auto-off when battery powered. Backlight deactivated below temperature ≈ -20°C|
|Alarm Indication||Flashing display plus HI/LO (alarm) or SET indicators.|
|Scan and Update Rate||Ambient > -20°C: Modbus PV scan rate programmable from 2 to 99 seconds per PV. Tag and units programmable for 1 to 5 second alternation. Pulse input variables update 1/second. Rate update is dependent on gate settings.
Ambient < -20°C: All Modbus scan, alternating units and tags, and pulse input variables update/10 seconds minimum.
|Under Range||Upper Display: Decimal display flashes -9999
Level display flashes to 399FT, 11 and 15/16 IN
Lower Display: Flashes -999999
|Over Range||Upper Display: Decimal display flashes 99999
Level display flashes to 399FT, 11 and 15/16 IN
Lower Display: Flashes 9999999
|Programming Method||Four SafeTouch through-window buttons when cover is installed. Four internal push buttons when cover is removed.|
|Recalibration||Calibrated at the factory to read frequency in Hz. No recalibration required.|
|Password Menu Options||Three programmable password selections can be used for the following: restrict modification of settings, prevent resetting the total or grand total without the password, or permanently lock out the ability to change or reset the grand total or any grand total related settings(making a non-resettable grand total).
Pass: Restricts modifications of programmed settings to require re-entering the password to make changes.
Pass T: Restricts the reset of total to require re-entering the password. Disables the manual mode reset contact.
Pass GT: Restricts the reset of grand total to require re-entering the password. May enable a non-resettable grand total and permanent lockout of grand total-related settings with a specific password.
|Input Power||9-30 VDC, 38 mA max. 2.2 W|
|Data Logging||Up to 512 records, recorded 4/day at specific times or at defined time intervals. Record contains first eight enabled Modbus PVs; C1-4 if enabled; date; time; pulse rate, total, and grand total with units; and log number.|
|Isolation (All Models)||500 V opto-isolated pulse input-to-power/OC output with isolated input enabled, 500 V input/power-to-RS-485 serial communications. AXA Models: 500 V input/power-to-analog output.|
|Environmental||Operating temperature range: -40 to 75°C; Storage temperature range: -40 to 75°C; Backlight deactivated below temperatures ≈ -20°C; Relative humidity: 0 to 90% non-condensing|
|Non-Volatile Memory||All programmed settings and total reading are stored in non-volatile memory for a minimum of ten years if power is lost.|
|Connections||Screw terminals accept 12 to 22 AWG wire|
|Enclosure||NEMA 4X, IP65 plastic field enclosure. Color: grey. Material: Polycarbonate with UV Stabilizer. Three ¾" NPT threaded conduit openings. Two ¾" NPT plastic conduit plugs, with 1.29" wrenching flats and a screwdriver slot, are included.|
|Mounting||May be mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1½" to 2½" or DN 40 to 65 mm pipe mounting.|
|Display Orientation||Display may be mounted at 90° increments up to 270° from default orientation.|
|Overall Dimensions (W x H x D)||5.67" x 5.25" x 4.18" (144 mm x 133 mm x 106 mm)|
|Weight||1.65 lbs (26.4 oz, .75 kg)|
|Warranty||3 years parts and labor|