Wireless signal repeaters are used to retransmit wireless signals when connectivity is an issue. They are incredibly simple to install as they only require power and a network ID. Any units in range of the repeater with the same network ID will retransmit through it, thus increasing signal strength. Use repeaters to broadcast over very long distances or around permanent obstacles.
• Retransmits Wireless Signals
• Broadcasts Long Distances and Around Obstacles
• Flanges for Wall or Pipe Mounting
• NEMA 4X, IP68 Cast Aluminum Enclosure
Display 32-character dual-line alphanumeric dot matrix LCD display with backlight (4.68mm x 2.21mm characters)
Orientation Display may be mounted at 180° from default orientation
Network ID Field selectable: 0 - 99
Methods Four programming buttons (behind glass) or PC with PDW Manager software.
Recalibration All inputs and outputs are calibrated at the factory. Recalibration is recommended at least every 12 months.
Display Press the display button once to display the present analog input and output, press the display button again to display digital I/O states.
Password A programmable password restricts modification of programmed settings.
Power 12-28 VDC, 5 W max
Memory All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Isolation 500 V
Environmental Operating temperature range: -40 to 65°C (display inoperable < -20 °C); Storage temperature range: -40 to 85°C; Relative humidity: 0 to 90% non-condensing
Connections Removable screw terminal blocks accept 16 to 30 AWG wire.
Enclosure Cast aluminum with glass window, 0.30% max copper content, corrosion resistant powder coating, color: blue. NEMA 4X/IP68. Two ½" NPT threaded conduit openings. One ½" NPT stainless steel conduit plug with 10 mm hex key fitting installed.
Mounting May be mounted directly to conduit. Two mounting holes for 1.5" pipe or wall mounting. See Mounting Dimensions on page 15 for mounting space requirements.
Torque 2.5 lb-in (0.28 Nm)
Dimensions 17" x 14" x 9" (43.2 cm x 35.6 cm x 22.9 cm) (L x W X H)
Weight 5 lbs. (2.27 kg)
Warranty 3 years parts & labor
Frequency 900 MHz
Range 500 ft (152.4 m) indoor, 1 mi (1.61 km) outdoor (line-of-sight)
Encryption AES 128-bit encryption available using PDW Manager software
Reduction Frequency Hopping Spread Spectrum (FHSS)
Power Output 24 dBm (250 mW)
Sensitivity -101 dBm
PDW Manager Software
Requirements Microsoft® Windows® XP/Vista/7/8/10
Communications USB 2.0 (Standard USB A to Micro USB B)
Configuration Configure devices one at a time