Quatrosense Environmental Ltd.
Q-CONTROLLER Series Universal 256 Sensor Digital-Analog ...RS 485 communication protocol that accommodates 128 channels through four digital ports, Modbus is standard, BacNet optional
The Q-Controller includes features that are unique to the gas detection industry. The system uses an RS 485 communication protocol that accommodates 128 channels through four digital ports. In addition there are 128 analog inputs from any 4-20mA device and equally 128 4-20mA outputs. There are also up to 128 binary inputs and 128 binary outputs. Standard is a Modbus output from the controller as well as an available BacNet IP output(spring 2016).
The system communicates wirelessly for programming and downloading of data through your smartphone or tablet device. Input/output boxes can be installed anywhere in the RS 485 network for ease of installation of additional sensors. A touch screen graphic display is used for programming. All relevant gas detection data, such as relay status, historical data, location and addresses of sensors are displayed by scrolling through multiple screens.
The controller has a scheduler that can programmed to activate relays and deactivate relays several times a day based on a frequency of day, weekday or weekend only. It also has an auto configure program that searches for connected devices. As the unit can accept any 4-20mA signal it is ideal for additional monitoring such as temperature humidity and other parameters that may be of interest.
Several Q-Controllers can be connected together to a centralized system that will display gas detection concentrations of an entire facility. Remote monitors are an optional item that can be used to observe the concentration of gases prior to entering the space.
• 128 RS485 channels
• 128mA inputs and outputs
• 128 relay inputs and outputs
• Modbus and BacNet outputs
• Wireless Communication with smart devices
• Seven inch touchscreen display
• Data logging
• Eight event scheduler for daily, weekday or weekend events
• Auto configure feature
• 24VAC/VDC operation
• 4 x10Amp DPDT relays on main board up to 124 remote
• On board and remote annunciation
• Nema 4X enclosure with clear window
• Email alarms, configuration and datalogging files
| QEL Q-CONTROLLER Series Universal 256 Sensor Digital-Analog Controllers - Data Sheet 418.8 KB |
| QEL Q-CONTROLLER Series Universal 256 Sensor Digital-Analog Controllers - Manual 2.5 MB |
| QEL Q-CONTROLLER Series Universal 256 Sensor Digital-Analog Controllers - Installation Drawing 1.1 MB |
| QEL Q-CONTROLLER Series Universal 256 Sensor Digital-Analog Controllers - Modbus Instruction Manual 115.8 KB |
$200.00 CAD
$220.00 CAD
$220.00 CAD
$220.00 CAD
