The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a variety of applications where keeping moisture to a minimum is of critical importance.
The analyzer provides consistently accurate measurements of trace moisture. This consistency is achieved using a self-calibration system, which adjusts the sensor with reference to an internal moisture generator. The moisture generator is supplied with a calibration traceable to NPL and NIST, so long term stability of its measurements is guaranteed.
• Precision measurement from 0.1 to 2000ppmV
• Fast response in both dry to wet and wet to dry transitions
• Simple, low cost, on-site maintenance with long service intervals
• Dryer can be replaced by the user in 10 minutes
• Accuracy of 0.1ppmV or 10% of reading, whichever is greater
• Intuitive user interface
• Ethernet or USB digital communications
• SD card data logging
• Optional internal sample handling and bypass loop
• High purity gas production
• Air separation plants
• Semiconductor CVD chamber cleaning
• Semiconductor etching chambers
• H2 coolant for power generator sets
Item
Description
Availability
Price
Calibrated 0.5ppmV internal moisture generator (Michell engineer installation only)
Normally ships in 6-8 Weeks
$1,880.00 CAD
Calibrated 5ppmV internal moisture generator (Michell engineer installation only)
Normally ships in 6-8 Weeks
$1,880.00 CAD
Calibrated 50ppmV internal moisture generator (Michell engineer installation only)
Normally ships in 6-8 Weeks
$1,880.00 CAD
QMA601 Sample block/oven assembly (calibrated w/ ~0.5ppmv MG, 2 barg input, 1 barg back pressure)
Normally ships in 3-4 Weeks
$15,873.00 CAD
QMA601 Sample block/oven assembly (calibrated w/ ~5ppmv MG, 2 barg input, 1 barg back pressure)
Normally ships in 3-4 Weeks
$15,873.00 CAD
QMA601 Sample block/oven assembly (calibrated with ~50ppmv MG, 2 barg input, 1 barg back pressure)
In Stock
$15,873.00 CAD
Dryer assembly for the Michell QMA401
Normally ships in 6-8 Weeks
$2,212.00 CAD
QMA601 Dryer assembly (New Case Style)
Normally ships in 3-4 Weeks
$2,561.00 CAD
Sensor pressure test kit (Michell engineer installation only)
Normally ships in 6-8 Weeks
$3,321.00 CAD
View All Part Numbers