The Series LCT216 Digital Timer / Tachometer / Counter combines a versatile timer, counter, and tachometer in one device. The bright, easy-to-read display shows both the desired set point and the current process value as well as the operating mode that the control is functioning in. The fourteen pre-programmed timer functions are easy to set up and cover most applications. The counting functions include one stage or two-stage counting along with batch, total, or dual counting modes. The Series LCT216 can also be used as a tachometer to measure rotational speeds. For quick setup, many of the programming parameters can be set with external dip switches located on the side of the unit.
• Fourteen pre-programmed timer functions
• One stage, two-stage, batch, total, and dual counting modes
| Operating Temperature Range | 32 to 122°F (0 to 50°C). |
| Humidity Conditions | 35 to 85% RH (non-condensing). |
| Control Output Ratings | (Out 1) Relay: SPST 5A at 250 VAC, Transistor: NPN Open collector 100 mA / 30 VDC residual voltage = 1.5 VDC max; (Out 2) Relay: SPST 5A at 250 VAC, Transistor: NPN Open collector 100 mA / 30 VDC residual voltage = 1.5 VDC max. |
| Reset Time | 0.001 s. minimum. |
| Inputs | Dry contact, PNP, or NPN. |
| Timing Functions | 14 pre-programmed timing functions. |
| Power Requirements | 100 to 240 VAC 50 / 60 Hz. |
| Power Consumption | Less than 10 VA. |
| Internal Power Supply | 12 VDC ±10%, 100 mA. |
| Display | Two-line 6 digit negative transmissive LCD display. |
| Weight | 4 oz (114 g). |
| compliance | CE, UL. |
• Industrial ovens
• Batch counting in conveyor systems
• Silk screening equipment
View All Part Numbers