` T5-600 / 62 MAX+ / 1AC II IR Thermometer, Electrical Tester and Voltage Detector Kit - Alpha Controls & Instrumentation Inc.


T5-600 / 62 MAX+ / 1AC II IR Thermometer, Electrical Tes...

Solve problems quicker by first testing for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem

$534.00 CAD
Normally ships in 4-6 Weeks

  Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.

Kit includes the Fluke T5-600 Electrical Tester and the Fluke 62 MAX+ Infrared Thermometer.

Fluke T5 Voltage, Continuity and Current Testers:
• Automatically measures volts AC and volts DC with precise digital resolution
• Displays resistance to 1000 Ω
• Easy and accurate OpenJaw™ current measurement
• Continuity beeper
• Rugged enough to withstand a 10 ft (3 m) drop
• 600 V model
• Auto off mode to conserve battery life
• AC current
• Display hold
• All inputs of the T5-600 are protected to EN61010-1 CAT III 600V. UL, CSA and VDE listed

Fluke 62 MAX+:
• Dust and water-resistant: IP54 rated
• Rugged: 3 m (9.8 ft) drop tested
• Ergonomically designed: Completely redesigned for a more natural hand fit
• Distance to spot: 12:1
• Dual lasers: Identifies area to be measured
• Large, backlit display: Makes data easier to read, even in dark areas
• C115 Deluxe soft carrying case with shoulder strap

Fluke T5-600 Voltage, Continuity and Current Tester


Jaw Opening

12.9 mm (0.5 in)

Max. Wire Size

1/0 THHN Cable

Current Range AC RMS

0 A - 100.0 A

Accuracy AC Current (50 Hz / 60 Hz)

3 % +/- 3 counts

AC Response


Voltage Range AC

0 V - 600 V

Accuracy AC Voltage

1.5 % +/- 2 counts

Voltage Range DC

0 to 600 V

Accuracy DC Voltage

1 % +/- 1 count

Resistance Range

0 Ω - 1000 Ω

Continuity Beeper Threshold

On at < 25 Ω, off at > 400 Ω

Volts Indicator LED Threshold

Guaranteed on by 30 V AC


Environmental Specifications



-10°C - 50°C



-30°C - 60°C

Humidity (Without Condensation)

95 % (5°C - 30°C)

75 % (30°C - 40°C)
45 % (40°C - 50°C)

Dust / Water Resistance


Operating Altitude

2,000 m max

Temperature Coefficient

0.1 x (specified accuracy)/°C (< 18°C or > 28°C)


Safety Specifications

Overvoltage Category

CAT III 600 V ac/dc (EN61010-1)

Agency Approvals

UL, CSA, and VDE

Maximum Voltage

Between any terminal and earth ground


Mechanical and General Specifications


30.5 mm x 51 mm x 203 mm


300 g


2 years

Battery Life

200 h zinc chloride, 400 h alkaline

Battery Type

2 x AA

Low Battery Indicator


Current Sensor Opening

12.9 mm

Calibration Cycle

1 year

Test Leads


Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded banana plugs


One red, one black.
Detachable Slim-Reach™ probe tips


TP1 Slim Reach™ Test Probes


Safety Specifications


CAT IV 600 V, CAT III, 1000 V

Maximum Voltage

1000 V AC RMS from earth to ground, in compliance with EN61010



Fluke 62 MAX+ Infrared Thermometer


Temperature Range

-30°C - 650°C (-22°F - 1202°F)


+/- 1.0°C or +/- 1.0% of reading, whichever is greater
-10°C to 0°C: +/- 2.0
-30°C to -10°C: +/- 3.0

Response Time (95%)

Fluke 62 MAX+

< 300 ms (95% of reading)

Spectral Response

8 µs - 14 µs


0.10 - 1.00

Optical Resolution

12:1 (calculated at 90% energy)

Display Resolution

0.1°C (0.2°F)

Repeatability of Readings

+/- 0.5% of reading or < +/- 0.5°C (1°F), whichever is greater


AA battery

Battery Life

8 h with laser and bACklight on


255 g (8.99 oz)


175 mm x 85 mm x 75 mm (6.88 in x 3.34 in x 2.95 in)



0°C - 50°C (32°F - 122°F)


-20°C - 60°C (-4°F - 140°F), (without battery)

Operating Humidity

10% - 90% RH, Non-condensing at 30°C (86°F)



2,000 m above mean sea level


12,000 m above mean sea level

IP Rating

IP 54 per IEC 60529

Drop Test

3 m

Vibration and Shock

IEC 68-2-6 2.5 g, 10 Hz - 200 Hz, IEC 68-2-27, 50 g, 11 ms


EN 61326-1:2006 EN 61326-2:2006

Standards and Agency Approval


EN/IEC 61010-1: 2001

Laser Safety

FDA and EN 60825-1 Class II



Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement
Normally ships in 4-6 Weeks
$85.00 CAD
SureGrip alligator clips
Normally ships in 4-6 Weeks
$58.00 CAD
Interactive battery analyzer test probe set for the Fluke BT510 Battery Analyzer
Normally ships in 4-6 Weeks
$1,507.00 CAD
Replacement test leads for Fluke T5-1000 or T5-600 voltage, continuity and current testers
Normally ships in 4-6 Weeks
$64.00 CAD
Special value starter kit for the electrical professional who already owns a Fluke T5 Electrical Tester or is thinking of buying one
Normally ships in 4-6 Weeks
$84.00 CAD
The hard case that fits all Fluke industrial test tools
Normally ships in 4-6 Weeks
$144.00 CAD
Rugged fabric holster includes flap for lead storage and built-in belt loop
Normally ships in 4-6 Weeks
$64.00 CAD
Rugged construction with heavy duty stitching, reinforced rivets, and oil tanned for a long life
Normally ships in 4-6 Weeks
$116.00 CAD
Zippered carrying case with durable vinyl exterior
Normally ships in 4-6 Weeks
$73.00 CAD