TFP-LI Liquid Turbine Flow Meter

PPS body, 0 - 5 VDC output, 3-1/2 digit LCD, turbine wheel and electro-optical detection

Starting at

$1,640.93CAD

Have questions? We're here to help!

Call

Configure

Used in

Also found in

Series TFP-LI Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 - 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Service	Clean liquids compatible with wetted materials
Wetted Materials	PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer
Accuracy	± 1% of full scale
Linearity	± 1% of full scale
Repeatability	± 0.2% of full scale
Temperature Limits	41°F - 131°F (5°C - 55°C); Storage: 32°F - 158°F (0°C - 70°C); Sensitivity: ± 0.2% of full scale per °C
Pressure Limits	100 PSIG (6.8 Bar)
Process Connection	Compression fitting, see Catalog page
Power Requirements	11.5 VDC - 15 VDC
Power Consumption	35 mA @ 12 VDC
Output Signal	0 VDC - 5 VDC: Minimum 2.5 kΩ load
Electrical Connections	Four-pin power and signal connector. A power adapter or mating cable required for operation. See Accessories page
Display	LCD, 0.39 in (10 mm) digits (only in LPM)
Enclosure Rating	IP10 (NEMA 1)
Weight	0.27 lb (121 g)
Agency Approvals	CE