TFP-LP Liquid Turbine Flow Meter

PPS body, turbine wheel and electro-optical detection, 0 - 5 VDC output signal, pulse outputs

Starting at

$1,426.34CAD

Have questions? We're here to help!

Call

Configure

Used in

Also found in

Series TFP-LP Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. Couple this unit with a Series TM2 Flow Totalizer for a remote flow monitoring display. A power adapter or mating cable assembly is required for operation.

Service	Clean liquids compatible with wetted materials
Wetted Materials	PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer
Accuracy	± 1% of full scale
Linearity	± 1% of full scale
Repeatability	± 0.2% of full scale
Temperature Limits	41°F - 131°F (5°C - 55°C); Storage: 32°F - 158°F (0°C - 70°C); Sensitivity: ± 0.2% of full scale per °C
Pressure Limits	100 PSIG (6.8 Bar)
Process Connection	Compression fitting, see Catalog page
Power Requirements	11.5 VDC - 15 VDC
Power Consumption	35 mA @ 12 VDC
Output Signal	0 VDC - 5 VDC: Minimum 2.5 kΩ load; Pulse: 7.5 VDC peak buffered square wave
Electrical Connections	Four-pin power and signal connector. A power adapter or mating cable required for operation. See Accessories page
Enclosure Rating	IP10 (NEMA 1)
Weight	0.19 lb (85 g)
Agency Approvals	CE