Fluke

Ti450 PRO Infrared Camera

Features SuperResolution to capture and combine 4x the data to create a 540 x 480 image


This product is obsolete and has been replaced by:
Ti480 PRO Infrared Camera


Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

With the Ti450 PRO, worry about focus is obsolete. MultiSharp™ focus captures images that are focused throughout the field of view, even if you start from a completely blurry target. The camera takes multiple images and combines them to give a clear, accurate focus on targets near and far.

Capture smaller temperature differences with increased thermal sensitivity.  More greens and yellows in the display offer better images that will help to distinguish heat differences more clearly.  Display deviations from standard temperatures and communicate issues with your team using multiple Delta- T markers - choose one as a reference point and the others to display a value as a difference. Multiple rectangle markers in-camera identify Min/Max temperatures for an area of the equipment or an equipment array.

The Ti450 PRO is now compatible with all Fluke infrared smart lenses, including the macro-to-telephoto and wide angle to capture your target. Fluke smart lenses are interchangeable between compatible cameras without calibration.

You can wirelessly sync images directly from your camera to the Fluke Connect® system, and attach it to an asset record or work order. Having access to maintenance records simultaneously at the inspection site and from the office or an off-site location enables faster decision making and real time collaboration between team members. You can also live stream the camera display to your smartphone or PC and remotely control the camera.

• Increased sensitivity to visualize temperature differences
• NETD of ≤ 0.025°C at 30°C target temp (25 mK)
• Easier to visualize and diagnose issues with sharper on-screen images, multiple rectangle markers and 9 color palettes
• More intuitive visual interface, improved, user-tested, touch screen interface
• More flexibility to visualize targets–tiny to large with interchangeable smart lenses—no calibration required, 2x and 4x telephoto, wide angle and macro lenses are compatible with Ti480 PRO and Ti450 PRO
• Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
• Get an instant in-focus image of your designated target using LaserSharp® Auto Focus
• Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 640 x 480 image
• Reduce the need to take notes in the field with two helpful features; IR-PhotoNotes™ and voice annotations
• Highlight areas that are outside your pre-set ‘normal’ temperature ranges quickly with color alarms
• Save time by wirelessly syncing images directly from your camera to the Fluke Connect® system

Temperature Measurement

Temperature Measurement Range (Not Calibrated Below -10°C)

-10 °C to 1500 °C (14 °F to 2732 °F)

Accuracy

± 2 °C or 2 % (at 25 °C nominal, whichever is greater)

On-Screen Emissivity Correction

Yes (both value and table)

On-Screen Reflected Background Temperature Compensation

Yes

On-Screen Transmission Correction

Yes

Live Line Marker

Yes

General Specifications

Color Alarms (Temperature Alarms) 

High temperature, low temperature, and isotherms (within range)

Infrared Spectral Band 

7.5 μm - 14 μm (long wave)

Operating Temperature 

-10°C - 50°C (14°F - 122°F)

Storage Temperature 

-20°C - 50°C (-4°F - 122°F) without batteries

Relative Humidity 

10% - 95%, Non-condensing

Center-Point Temperature Measurement

Yes

Spot Temperature 

Hot and cold spot markers

User-Definable Spot Markers 

Three (3) user-definable spot markers

Center Box 

Expandable-contractible measurement box with MIN-MAX-AVG temp display

Safety 

IEC 61010-1: Overvoltage category II, Pollution Degree 2

Electromagnetic Compatibility 

IEC 61326-1: Basic EM environment. CISPR 11: Group 1, Class A

Australian RCM 

IEC 61326-1

US FCC 

CFR 47, Part 15 Subpart B

Vibration 

0.03 g2/Hz (3.8 g), 2.5 g IEC 68-2-6

Shock 

25 x g, IEC 68-2-29

Drop 

Engineered to withstand 2 m (6.5 ft) drop with standard lens

Size (H x W x L)  

27.7 cm x 12.2 cm x 16.7 cm (10.9 in x 4.8 in x 6.5 in)

Weight (Battery Included)

1.04 kg (2.3 lb)

Enclosure Rating

IEC 60529: IP54 (protected against dust, limited ingress; protection against water spray from all directions)

Warranty

Two years (standard), extended warranties are available

Recommended Calibration Cycle

Two years (assumes normal operation and normal aging)

Supported Languages

Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish

ROHS Compliant

Yes

Item
Description
Availability
Price
Fluke 2x Telephoto IR Smart Lens for TiX560, TiX520, Ti400, Ti300, Ti200; ideal for maintenance, electrical, process, and other equipment viewed from a distance
Normally ships in 4-6 Weeks
$1,781.00 CAD
Fluke 4x Telephoto IR Smart Lens for TiX560, TiX520, Ti400, Ti300, Ti200; ideal for petrochemical, electrical utilities, and metals refinement
Normally ships in 4-6 Weeks
$8,623.00 CAD
Fluke Wide Angle IR Smart Lens for TiX560, TiX520, Ti400, Ti300, Ti200; ideal for electrical and building inspections - in a tight space or viewing a large area
Normally ships in 4-6 Weeks
$1,781.00 CAD
Ideal for R&D and electronic design and validation to view thermal patterns on very small objects
Normally ships in 4-6 Weeks
$6,158.00 CAD
Clip onto a Fluke thermal imager to reduce LCD screen glare and reflections in bright sunlight or bright ambient light
Normally ships in 4-6 Weeks
$110.00 CAD
Tripod mounting accessory quickly and easily attaches to your Fluke Ti200, Ti300, or Ti400 thermal imager to mount to a standard tripod or monopod
Normally ships in 4-6 Weeks
$147.00 CAD
Bluetooth Headset for TiX560, TiX520, TiX500, Ti450, Ti400, Ti300, TiS75, TiS65, TiS60, TiS55, TiS50, TiS45, TiS40, TiS20, TiS10
Normally ships in 4-6 Weeks
$103.00 CAD
Thermal imager car charger
Normally ships in 4-6 Weeks
$178.00 CAD
Charging base for TI-SBP3 rechargeable lithium ion battery packs
Normally ships in 4-6 Weeks
$247.00 CAD
Extra battery pack for Fluke Infrared Cameras
Normally ships in 4-6 Weeks
$178.00 CAD