ULD-400-T Ultrasonic Leak Detector Transmitter
Generates ultrasonic signals for locations where the gas/air leak does not have sufficient pressure to create an ultrasonic sound
The ULD-400-T Ultrasonic Leak Detector Transmitter can generate ultrasonic signals for locations where the gas/air leak does not have sufficient pressure to create an ultrasonic sound. The Transmitter will allow for ultrasonic detection by the Receiver at cracks and openings. The ULD-400-T is included in the ULD-420 kit.
• Generates an ultrasonic signal when working in unpressurized systems
• Signal is readable by the ULD-400-R Receiver
• Find air and water leaks in automobile windshields and windows, fluid and gas tanks, building windows, door, roofs and more
• ULD-420 kit includes the ULD-400-T Transmitter
| Signal Level Adjustment | Yes |
| Frequency Range | 40 kHz, bandwidth ±0.5 kHz |
| Power Supply | 2 x 1.5 V AAA (LR03) alkaline batteries |
| Power Consumption (typical) | 33 mA |
| Battery Life (typical) | 60 hours (Alkaline) |
| Low battery indication | Yes (Red LED) |
| Weight | Approx. 0.335 lb (0.152 kg) |
| Dimensions | 5.295 x 2.559 x 1.326 in (137 x 65 x 33 mm) |
| APO function | 60 minutes when in idle |
| Operating Temperature | -4 °F to 122 °F (-20 °C to 50 °C) |
| Storage Temperature | -4 °F to 158 °F (-20 °C to 70 °C) |
| Operating Humidity | <80% RH |
| Pollution Degree | 2 |
| Protection | IP40 |
| Amprobe ULD-400-T Ultrasonic Leak Detector Transmitter - Datasheet 5.1 MB |
| Amprobe ULD-400-T Ultrasonic Leak Detector Transmitter - Product Manual 5 MB |
