ULD-405 Ultrasonic Leak Detector
Converts ultrasonic sound into a signal that can be used to pinpoint the exact location of the equipment failure
When equipment begins to fail due to an air or gas leak or vibration, or electrical discharge, the leakage point emits an ultrasonic sound wave that is above the natural range of human hearing. The ULD-405 Ultrasonic Leak Detector converts this ultrasonic sound into a signal that can be used to pinpoint the exact location of the equipment failure. Find air leaks that drop down performance and incur additional power consumption, requiring more energy to compensate lost pressure. See the strength of the leak clearly on the large LCD bargraph and identify the source of the leak by listening to the converted audible sound emitted via the earbuds.
| Sensitivity Adjustment | Yes |
| Volume Adjustment | Yes |
| Earphone Jack (3.5 mm) | Yes |
| Display Size | LCD 2.5 in (6.35 cm) |
| Display Dimensions | 1.45 x 1.93 in (36.72 x 48.96 mm) |
| Display Resolution | 240(RGB) x 320 pixels |
| Display Type | TFT-LCD (262 K) |
| Display Color | True, 16bit/color |
| Frequency Range | 20 kHz to 90 kHz |
| Power Supply | 4 x 1.5 V AA (LR6) alkaline batteries |
| Power Consumption (typical) | 75 mA |
| Battery Life (typical) | 105 hours (Alkaline) |
| Low Battery Indication | Yes |
| Weight | Approx. 0.518 lb (0.235 kg) |
| Dimensions | 7.547 x 2.984 x 1.791 in (183 x 75 x 43 mm) |
| APO function | 60 minutes when in idle |
| Operating Temperature | -4 °F to 122 °F (-20 °C to 50 °C) |
| Storage Temperature | -4 °F to 158 °F (-20 °C to 70 °C) |
| Operating Humidity | <80% RH |
| Pollution Degree | 2 |
| Protection | IP40 |
| Amprobe ULD-405 Ultrasonic Leak Detector - Datasheet 520.5 KB |
| Amprobe ULD-405 Ultrasonic Leak Detector - Product Manual 2.2 MB |
