The Cryo Logger with the very thin and flexible tip is the perfect datalogger for an extended temperature range from -85°C to +140°C. The Logger provides a single solution for a variety of applications, such as cryogenic chambers, Lyophilizers, ultralow freezers and other deep temperature applications. It is also perfect to be used in autoclaves and other high temperature applications
It is a single solution that provides significant cost savings and productivity gains. RTD Technology delivers unrivalled measurement accuracy. The new logger design improves the battery life by three times over the existing design.
The new flexible Cryo Logger is designed for easy on-site user verification between studies with the traditional IRTD and low temp CTR-80 Bath or LTR-90 dry well.
The small and flexible sensor of the logger, with a stainless steel tip, allows a usage in most of the Pharma applications and it can also be used in combination with very small vials.
ValProbe satisfies FDA Regulation 21 CFR Part 11 requirements for electronic signatures and records and complies with EN 554 for saturated steam sterilization.
• Temperature range for complete Logger: -85°C to 140°C
• Battery Life: 3x better than standard ValProbe Logger
• 1 m long and 1.8 mm thin robust flexible sensor with 2.2 mm stainless steel tip
| Sensing Element | Precision Platinum RTD |
| Measurement Range and Accuracy | 0°C to 140°C, ±0.1°C -85°C to 0°C, ±0.25°C |
| Environmental Temperature Humidity Pressure | -85°C to 140°C 0% to 100% humidity, condensing Atmospheric pressure / non pressurized environment |
| Logger Material | 316L stainless steel |
| Logger Base Dimensions | 1 13/16 x 1 3/8 in diameter (46mm x 35 mm) |
| Battery | Field-replaceable 3.6 V lithium thionyl chloride |
| Sampling Rate | 1 second to 12 hours |
| Data Storage | 10,000 samples retained in non-volatile EEPROM memory |
| Calibration | Factory calibrated (NVLAP/DAkkS accredited) with user calibration capability |
| Real Time Clock Accuracy | 15 seconds per 24 hours (0.0174%) |
| Sensor | Flexible Teflon Cable |
| Total Length (sensor + cable) | 40" (100 cm) |
| Cable Diameter | 0.07" (1.8 mm) |
| Stainless Steel Tip | length 1" (25 mm) diameter 0.087" (2.2 mm) |
| Part Number | XCFVP-40 |
• Cryogenic Vessels
• Freeze Dryer
• Freezers
• Incubators
• Warehouses
• Sterilizers/Autoclaves
| Kaye ValProbe Cryo Logger - Data Sheet 161.7 KB |
| Kaye ValProbe Cryo Logger - Brochure 806 KB |
