WTG 2.4 GHz Wireless Temperature Data Logger

Wirelessly transmit and receive all data automatically at your PC without having to hard-wire or retrieve data from your loggers

Starting At
$711.00 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

Place these data loggers throughout your facility and receive all data automatically at your PC.  No retrieving data from loggers, no hard wiring loggers back to your PC.  This is the easiest and most cost-effective way to create a scalable monitoring network.

Five models are available, each differing in the type or number of probes.  WTG30 comes with one (1) thermistor probe, while the WTG35 comes with two (2) thermistor probes (with attached glycol bottle).  The WTG40 model comes with one (1) K type thermocouple probe, while the WTG45 comes with two (2) K type thermocouple probes.  The WTG50 model comes with one (1) platinum RTD probe (hard-wired).

Each data logger comes with a USB cable, AC adapter, four (4) AA batteries, and a quick start guide.

• Email and Text alerts available
• Eliminates the need to change charts and pens
• Data automatically downloaded to your computer
• Loggers continue to log in the event of a power outage
• Thermistor probe (WTG30/5), K type thermocouple probe (WTG40/5), or platinum RTD probe (WTG50)

Alarm Type Audio high/low, low battery, calibration due, lost communication alarm
Ambient Operating RH Conditions 0% - 95% RH, Non-condensing (logger only)
Ambient Operating Temperature Conditions -22.0F - 122.0F (-30.0C - 50.0C)
Antenna Type Internal
Approvals RoHS, FCC part 15 compliance, CE
Battery Backup Four (4) AA batteries
Battery Life (Avg) 6 months (at 2 min sample rate in moderate conditions)
Cable Details USB - male series A plug to 5 pin male series B mini plug
Cable Length 6 ft
Calibration Options N100, N300, N400, N520
Channels CH1: Temperature (CH2: Temperature)
Data Capacity 32,000
Digital Display Yes
Dimensions 1.7 in x 4.25 in x 4.25 in
Download Type Ethernet
Enclosure Black ABS plastic clam shell
IP Rating 21
Included Accessories USB cable, AC adapter, four (4) AA batteries, quick start guide, probe (type and quantity are model dependent)
Mounting Options Free standing or wall mount (with keyhole)
Note on Alarm Type All alarm conditions will generate a pop-up notification in the Dickson WiZARD software. Text/email notification available with use of WiZARD Enterprise and SECURE software.
Notes Logger reads temperature and sends data back to the receiver at regular intervals
Output Signal 4800 baud serial data
PC Requirements Minimum of 2 GB RAM; Windows XP (with service pack 3), and Windows 7; available USB ports
Power Cord 6 ft
Power Source 120 V - 240 V AC, 12 V DC (INTL fittings available)
Power Source Input 100V - 240 V AC, 0.5 V, 50/60 Hz
Power Source Output 9 V DC, 1 A
Power Status Indicator Red/Green/Blue (RGB) LED
Radio Frequency 2.4 GHz
Remote Sensor Length 4, 6, or 10 ft
Remote Sensor Type WTG30/5: Thermistor probe with attached glycol bottle
WTG40/5: K type thermocouple probe
WTG50: Platinum RTD probe
Response Time 30 s to 63% FS
Sample Interval User selectable (from 10 s - 1 hr, in 10 s intervals)
Signal Strength Less than 100 mW
Storage Conditions -22.0F - 158.0F (-30.0C - 70.0C), 0% - 95% RH, Non-condensing
Unit Weight 3 lbs
Units/Pkg 1
Wireless Range 300 ft