Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
Companion to your Scopemeter, Power Quality Meter, or Digital Multimeter to measure up to 200 A AC. Included adapter for DMMs. Has two ranges of 20 A & 200A, 10 or 100 mV/ A output. Allows you to take accurate current readings without breaking the circuit. Max conductor of 20 mm and a CAT III 600 V safety rating.
Specifications | ||
Current Range | Nominal | 20 A 200 A |
Continuous | 0.1 A - 24 A 0.5 A - 200 A | |
Maximum Non-Destructive Current | 240 A | |
Lowest Measurable Current | 0.1 A | |
Basic Accuracy | 1.5% + 0.5 A | |
Useable Frequency | (48 Hz - 60 Hz) | |
Output Level(s) | (% of reading + floorspec) | |
Safety Specifications | ||
Safety | CAT III 600 V | |
Maximum Voltage | 600 V AC | |
Mechanical & General Specifications | ||
Warranty | 1 year | |
Maximum Conductor Diameter | 20 mm | |
Maximum Conductor Size (Busbar) | 20 mm x 5 mm | |
Output Cable Length | 2 m | |
BNC Adapter | Yes | |
BNC to Banana Adapter Included | Yes | |
| Fluke i200s AC Current Clamp - Instructions 701.1 KB |
