`
This AC current clamp with BNC output extends the functionality of portable oscilloscopes or power quality meters to measure up to 400 A AC
Fluke current clamps extend the current ranges of digital multimeters, power quality analyzers, and portable oscilloscopes and are available for both AC and AC/DC environments. The Fluke i400s is specially designed to offer maximum utility in a compact shape and is the only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.
• Companion to your scope or power quality meter to measure up to 400 A AC
• Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
• Specially designed to offer maximum utility in a compact shape
• Take accurate current readings without breaking the circuit
• Soft non-slippery overmold handle
• Optional PM9081/001 BNC/Banana adapter for DMM's
• Two ranges: 40 A and 400 A, 10 and 1 mV/A output
• Max. conductor Ø 32 mm
Specifications | |||
Nominal Current Range | 40 A Range | 0.5 A - 40 A | |
400 A Range | 6 A - 400 A | ||
Basic Accuracy | 40 A Range | 2% + 0.015 A (45 Hz - 400 Hz) | |
400 A Range | 2% + 0.04 A (45 Hz - 400 Hz) | ||
Phase Shift | 40 A Range | ||
| 0.5 A - 1 A 1 A - 5 A 5 A - 10 A 10 A - 20 A 20 A - 40 A 40 A - 400 A | Unspecified 4° 3° 3° 2° N/A | |
400 A Range | |||
0.5 A - 1 A 1 A - 5 A 5 A - 10 A 10 A - 20 A 20 A - 40 A 40 A - 400 A | N/A N/A Unspecified 2° 2° 1.5° | ||
Typical Bandwidth | 40 A Range | 5 Hz - 10 kHz | |
400 A Range | 5 Hz - 10 kHz | ||
Output Level(s) | 40 A Range | 10 mV/A | |
400 A Range | 1 mV/A | ||
Crest Factor | 40 A Range | ≤ 3 | |
400 A Range | ≤ 3 - 300 A ≤ 2.5 - 400 A | ||
Safety Specifications | |||
Safety | CAT IV 600 V / CAT III 1000 V | ||
Maximum Non-Destructive Current | 1000 V AC | ||
Mechanical & General Specifications | |||
Warranty | 1 year | ||
Maximum Conductor Size | 32 mm (1.25 in) | ||
Output Cable Length | 2.5 m (8.2 ft) | ||
BNC Adapter | Yes | ||
Dimensions | 150 mm x 70 mm x 30 mm | ||
Weight | 114 g | ||
View All Part Numbers