Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A ac current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers.
Low level current clamp measures up to 5 A AC. Compact shape makes transporting and storing convenient; the clamp measures only 116 mm x 43 mm x 23 mm (4.6 in x 1.7 in x 0.9 in). Take accurate readings without breaking the circuit. CAT III 600 V (For insulated conductors only).
Specifications | ||
Current Range | Nominal | 5 A |
Continuous | 10 mA - 6 A | |
Maximum Non-Destructive Current | 70 A | |
Lowest Measurable Current | 10 mA | |
Basic Accuracy (48 Hz - 65 Hz) | 10 mA - 1 A | 1% + 5 mA |
1 A - 5 A | 1% | |
Useable Frequency | 40 Hz - 5 kHz | |
Output Level(s) | 400 mV/A | |
Input Load Impedance | > 1 MΩ in parallel with up to 47 pF | |
Crest Factor | ≤ 3, add 0.7% to accuracy | |
Safety Specifications | ||
Safety | CAT III 600 V per IEC/EN61010-1, Pollution Degree 2 | |
Maximum Voltage | 600 V AC | |
Mechanical & General Specifications | ||
Warranty | 1 year | |
Maximum Conductor Diameter | 15 mm | |
Output Cable Length | 2.5 m | |
BNC Adapter | Yes | |
BNC to Banana Adapter Included | No | |
| Fluke i5S AC Current Clamp - Instructions 190.7 KB |
