8146 Series Fire Alarm Stations
Used to activate alarm circuits in hazardous and or wet, corrosive industrial applications
These Fire Alarm Stations are used to activate alarm circuits in hazardous and/or wet, corrosive industrial applications. The fire alarms are of the break-glass type construction.
Two styles of stations are available:
Automatic Model– after glass is broken, actuator is automatically released to activate alarm circuit.
Manual Model– after glass is broken, actuator must be pushed to activate alarm circuit.
• The Fire Alarm Station is made from corrosion resistant fiberglass reinforced polyester. The enclosure is molded from highly visible bright red material.
• The enclosure gasket is made from polyurethane and is installed into recessed cover groove.
• The cover screws are captivated, slotted and made of 316 grade stainless steel.
• 1/2” and 3/4” hubs are available in dead-end and feed-thru configurations.
• A hammer is mounted to the side of the alarm station and is attached by an 11” chain.
