Skip to main content
Press Enter
OMEGA

DPF-521 Flow Batching Processor with Output Controls

Flow Batching Processor

Normally ships in
2-3 weeks
Have questions? We're here to help!
Have questions? We're here to help!

Supported Applications

The Omega DPF-520 Series is a batching flow processor with additional output controls, designed for use with Omega flow meters and flow sensors, as well as other manufacturers' products that provide frequency outputs proportional to flow. The series indicates flow rate and totalized data on a backlit display featuring 9.66 mm (3/8") digits.

Documented applications include:

• Batch control
• Regeneration control
• High/low flow rate monitoring
• Water usage monitoring
• Pulse-responsive metering pump proportional chemical feed via programmable pulse-scaled outputs
• Flow rate logging using analog output signals

Operating Conditions & Performance

The DPF-520 Series operates within an ambient temperature range of 32° - 130° F (0° - 55° C). The unit accepts a sensor input frequency from 1 to 1000 Hz, which is ESD protected and interfaces with current sinking sensor outputs including NPN, TTL, or contact closure. Sensor power is provided at 12 Vdc, 10 mA.

Display resolution includes an 8-digit totalizer and a 5-digit rate display. User-selectable units of measure for volume include Gallons, cubic feet, cubic meters, millions of gallons, milliliters, fluid ounces, pounds, and liters; time units include Seconds, minutes, hours, and days.

Configuration Options

The series supports multiple power configurations: 115 Vac, 50/60 Hz @ 125 mA (with a standard 3-wire cord included), optional 220 Vac, or DC powered via an internal terminal strip at 12 Vdc @ 750 mA or 10 to 16 Vdc. The enclosure is precision cast aluminum with a NEMA 4X (IP56) rating.

Output capabilities include:

• Analog outputs: 4-20 mA passive opto-isolated, 4-20 mA active, 0-5 Vdc, or 0-10 Vdc
• Batch Outputs: Two form C (SPDT) relays rated at 115 Vac 6A max
• Pulse Outputs: Two programmable pulse-scaled outputs providing up to 100 mA at 60 Vac/Vdc, opto-isolated, open-collector

Memory is stored in non-volatile EEPROM with auto-backup. The housing supports wall-mount applications using two supplied brackets or panel-mount configuration by separating and reassembling the top/bottom housings.

Key Product Differences

The series includes specific model variants to address distinct control needs:

• DPF-521: Wall mount batch controller (115 Vac)
• DPF-521C: Wall mount batch controller with regeneration control
• DPF-521R: Wall mount batch controller with rate alarm
• DPF-521C-220V: Wall mount batch controller with regeneration control, 220 Vac power
• DPF-521R-220V: Wall mount batch controller with rate alarm control, 220 Vac power
• DPF-522: Wall mount usage monitor (115 Vac)
• DPF-522-220V: Wall mount usage monitor, 220 Vac power

• Batch Control
• Regeneration Control
• High/Low Flow Rate Monitoring
• Water Usage Monitoring
ApprovalsRoHS Compliance
Control Output2 SPDT Relay, 2 Isolated DC Pulse
Cutout Dimensions5.67 x 5.67 in
Display ColorBlack
Display NoteTotalizer = 8 digit Rate = 5 digit, backlit
Display TypeLCD
Electrical Output4 to 20 mA, 0 to 5 Vdc
Enclosure MaterialAluminum
Enclosure RatingsIP56, NEMA Type 4X
Form factor1/2 DIN
Frequency Input Range1 to 1000 Hz
Frequency Input Range Note1 to 1000 Hz, ESD protected, interfaces to current sinking sensor (NPN, TTL, contact closure) output
Front Panel Dimensions6.42 x 6.42 in
Input TypeFrequency
MemoryNon-Volatile EEPROM, Auto-backup
Mounting OrientationPanel Mount, Wall Mount
Number of Digits8
Number of Inputs1
Number of Relays2
Operating Temperature, Max55 °C
Operating Temperature, Min0 °C
Panel Depth4.65 in
Pulse Output Note100 mA at 60 Vac/Vdc, opto-isolated, open-collector
Sensor/Transmitter Power12 Vdc, 10 mA
Series IDDPF-521-522-Series
Switch Rating6A @ 115 Vac
Switch TypeSPDT NO/NC, Selectable
Switch Type NoteTwo form C (SPDT) relays, 115 Vac 6A maximum
  • Download

    Data Sheet - DPF-521 Flow Batching Processor with Output Controls

    Download
  • Download

    Manual - DPF-521 Flow Batching Processor with Output Controls

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more