EA2-IS-TX I.S. Dew Point Transmitter

Name: EA2-IS-TX I.S. Dew Point Transmitter
SKU: placeholder-ea2-is-tx-i-s-dew-point-transmitter
Availability: InStock

Designed & certified for use in hazardous area applications in all regions w/ certification from: IECEx, CSA, FM and ATEX.

Have questions? We're here to help!

Call

Used in

EA2 IS TX I S Dew Point Transmitter 05567

The Easidew I.S. (intrinsically safe) is designed to measure trace moisture and water dew-point in hazardous area applications. It is certified for measuring trace moisture in flammable or explosive gases and a wide range of non-polar liquids. It carries global hazardous area certification from IECEx, cQPSus, ATEX, and UKCA.

The Easidew I.S. is available with a choice of process connections for easy installation or retrofit.

• Measurement ranges -110 up to +20 °Cdp

• Dew point or ppmV moisture content output

• 2-wire loop power connection

• Accuracy ±2 °Cdp

• Traceable calibration certificate

• Easidew I.S. IECEx, cQPSus, ATEX and UKCA approvals

• Low cost of ownership and easy maintenance with sensor exchange program

• 316 Stainless steel sensor and sample blocks

• 5/8” UNF, 3/4” UNF, G 1/2” process connections

• KF40 Glove box flange

• Oxygen service cleaned

Operating Temperature	-40 to +60°C
Compensated Temperature Range:	-20 to +50°C NOTE: The transmitter accuracy statement is only valid for the temperature range: -20/+50°C
Storage Temperature:	-40 to +60°C
Operating Pressure	45 MPa (450 barg) maximum
Overpressure Rating	x2 operating pressure 90 MPa (900 barg)
Flow Rate	1 to 5 Nl/min mounted in standard sampling block 0 to 10 m/sec direct insertion
Mechanical Specifications
Ingress Protection Sensor	IP66 in accordance with standard BS EN 60529:1992 NEMA 4 in protection accordance with standard NEMA 250-2003
Hazardous Area Certificates	ATEX: II 1 G Ex ia IIC T4 Ga (–20°C to +70°C) IECEx: Ex ia IIC T4 Ga (–20°C to +70°C) TC TR: 0Ex ia IIC T4 Ga (–20°C to +70°C) FM: Class I, Division 1, Groups A B C D, T4 cCSAus: Class I, Division 1, Groups A B C D, T4
Housing Material	316 Stainless steel
Dimensions	L=132mm x Ø45mm (with connector)
Filter (Sensor Protection)	Standard: HDPE Guard <10μm Optional: 316 stainless steel sintered guard <80μm
Process Connection and Material	5/8"- 18 UNF Alternatives: G1/2" BSP or 3/4"- 16 UNF 316 stainless steel
Weight	150g
Interchangeability	Fully interchangeable transmitter
Electrical Connections	Hirschmann GDS series (DIN 4350-C)
Diagnostic Conditions (Factory Programmed)	Condition-Output Sensor Fault-23mA Under range dew point-4mA Over range dew point-20mA
Approved Galvanic Isolators	KFD2-CR-EX1.20200 KFD2-STC4-EX1.H KFD2-CR-EX1.30200 MTL5041 KFD0-CS-EX1.50P MTL5040 KFD0-CS-EX2.50P
Performance
Measurement Range	-100 to +20°C dew point -110 to +20°C dew point
Accuracy	±2°C dew point
Response Time	5 mins to T95 (dry to wet)
Repeatability	0.5°C dew point
Calibration	Traceable 7-point calibration certificate
Electrical Specifications
Output Signal	4-20 mA (2-wire connection, current source) User-configurable over range
Output	Dew point, moisture content in ppmV
Analog Output Scaled Range	Dew point: -100 to +20°C Moisture content in gas: 0 - 3000 ppmV Non-standard available upon request
Supply Voltage	12 to 28 V DC
Load Resistance	Max 250 Ω @ 12 V (500 Ω @ 24 V)
Current Consumption	20 mA max
CE Marked	Certified
Operating Specifications