Skip to main content
Press Enter
OMEGA

FE12-120B 204°C Max Constant Wattage Heating Cable 120-480 Vac

Medium Temperature Constant Wattage Heating Cable (Price Per Foot)

Normally ships in
2-3 weeks
Have questions? We're here to help!
Have questions? We're here to help!
Configure

Supported Applications

The Omega FE Series is a medium temperature constant wattage heating cable designed for freeze protection and midrange process temperature control and maintenance applications. The series supports lines periodically purged with steam at pressures up to 150 psig.

Operating Conditions & Performance

This low-watt density electrical resistance heater features a continuous exposure rating of up to 204°C (400°F). For de-energized conditions, the maximum short-term exposure temperature is rated at 232°C (450°F). The cable construction includes moisture and chemical resistance with an extruded jacket made from Fluorocarbon film, specifically 20 Mil FEP. Electrical performance specifications include a dielectric strength in excess of 2500V.

Configuration Options

The FE Series is offered as a parallel resistance heater that can be cut to length at the job site while maintaining constant watt density. The cable features an overall nominal dimension of 7.62 x 5.08 mm (0.30 x 0.20") and includes a metal overbraid.

Available configurations include:

• Wattage densities: 3, 5, 8, and 12 Watts/ft
• Voltage ratings: Options available for 120 Vac through 480 Vac (including intermediate voltages such as 208 V and 277 V)
• Circuit lengths: Maximum circuit lengths vary by wattage and voltage, ranging from 180 ft to 880 ft based on a 10% end-to-end voltage variation allowance
• Hazardous location approvals: Factory Mutual Class I, Division II, Groups B, C, D; Class II, Division II, Groups E, F, G; and Class III

The series supports termination kits for FE cable. Control options include a complete selection of controllers and thermostats available online.

Key Product Differences

Variants within the FE Series are distinguished by wattage density, voltage rating, module length requirements, and maximum circuit lengths. The model number guide follows the format FE< Watts/ft >-< Volts >B. For example, an 8 W/ft cable rated for 120 Vac is designated FE8-120B.

Cable circuit module lengths vary by configuration: 3 and 5 Watt/ft models typically require a minimum of 2 ft or 4 ft modules depending on voltage. Higher wattage densities such as 8 W/ft may utilize 6 ft modules for higher voltages like 480 Vac. Ordering requires specifying the desired length in feet, with a minimum order quantity of 7.6 inches (25') per note.

• Continuous Exposure Rating up to 400°F
• Low Watt Density
• Parallel Resistance Heater
• Cut-to- Length at the Job Site
ApprovalsGroup B
Cable Length1 ft
Cable Length, Max180 ft
Cable MaterialNickel, Copper
Dielectric Strength2500 V
Heater Wire MaterialNichrome
Insulation20 Mil FEP
Module Length2 ft
Operating Temperature, Max148 °C
Operating Temperature NoteExposure Temperature: 0 to 204 °C; Short Term Exposure Temperature: 232 °C
Purchase NoteUse quantity to indicate length of cable to purchase (increments of 1 foot), min purchase of 25 ft
Series IDFE-HEATER
Wire Gauge12 AWG
Wire Thickness0.3 in
Wire Width0.2 in
  • Download

    Data Sheet - FE12-120B 204°C Max Constant Wattage Heating Cable 120-480 Vac

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more