The OmegaTM FLSC-AMP amplifies the low level signals from the magnetic pickup of gear teeth or flow transmitters by a factor of more than a hundred times to drive any Omega rate meter, counter or controller. It is mounted in a rugged 2 x 3" metal housing with screw terminals for easy installation.
NOTE:
The low voltage line from the magnetic pickup to the FLSC-AMP should be less than 3 m (10') in length, shielded and isolated from relays, solenoids or other sources of electrical noise (let the output line make the long run). If the input is too sensitive, lower the 1.1K input impedance by adding a 220 to 1 KO resistor across TB1, pins 1 and 2, to increase noise immunity.
• Ultra Low Speed to 15 kHz Operation
• 20 mV to 50 V Sensitivity
• 100 mA Current Sinking Output
• 11 to 26 Vdc Power Supply Range
| Height | 35.6 mm |
| Impedance Input | 1500 Ω |
| Input Range | 0.020 to 50 V |
| Input Type | Voltage |
| Length | 76.2 mm |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Open Collector with internal 2700 ohms pull-up resistor to supply voltage. 100 mA Maximum sink to 1 v or less |
| Series ID | FLSC-AMP-Low-Lvl-Amp |
| Supply Power | 11 to 26 Vdc; 30mA Max |
| Supply Power Type | DC |
| Width | 55.9 mm |
Request a Calibration Quote
We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn moreBrowse By Brands
Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more