Skip to main content
Press Enter
OMEGA

MHP Heavy Duty Aluminum Handle Thermocouple Probe

Heavy Duty Aluminum Handle Thermocouple Probe

Normally ships in
3-4 weeks
Have questions? We're here to help!
Have questions? We're here to help!

 Supported Applications

The Omega MHP series comprises Heavy Duty Aluminum Handle Thermocouple Probes designed for industrial temperature measurement applications. These handheld probes provide a rugged interface for spot-checking and process monitoring tasks where manual insertion is required.

Operating Conditions & Performance

The Metal Handle Probe (MHP) meets or exceeds Special Limits of Error (SLE) and EN 60584-2: Tolerance Class 1. Standard configurations with PFA-insulated lead wire support measurement ranges up to 450°F. For higher temperature service, glass-insulated leads are available as an option for measurements up to 900°F.

Key performance and construction parameters include:

• Accuracy Class: Special Limits of Error (SLE) / EN 60584-2: Tolerance Class 1
• Housing Material: Cast-aluminum handle
• Sheath Material: 304 SS
• Junction Types: Grounded (standard), Ungrounded, or Exposed

Configuration Options

The MHP series offers extensive configurability across probe diameter, length, calibration type, and lead wire insulation to accommodate specific installation constraints.

Diameters and Lengths

• Probe Diameters: 1.5 mm (1/16"), 3.0 mm (1/8"), 4.5 mm (3/16"), or 6.0 mm (1/4")
• Standard Probe Lengths: Available from 32 mm (1.25") minimum up to 1 m (40"). Probes over 150 mm (6") incur additional cost per inch.
• Custom Engineering: Required for lengths exceeding 1.2 m (48").

Calibration and Junction Options

• Thermocouple Types: J, K, T, E, or N calibrations are specified via the model number.
• Junction Configuration: Grounded junctions are standard. Ungrounded probes are available by changing the 'G' suffix to 'U'. Exposed bead options (suffix 'E') are also offered for specific models.

Lead Wire and Connector

• Standard Lead: PFA-insulated lead wire potted into a 304 SS sheath.
• High-Temp Option: Fiberglass insulated lead wire (GG suffix) for service up to 900°F. Glass-insulated leads are also available as an option.
• Connector Type: Male SMP Miniature Connector is standard; connector terminations -OSTW-M or -SMPW-M are supported.

Key Product Differences

The MHP series model number structure defines the specific configuration. The format follows: MHP-(*SS-14G-(**)-SMP, where:

• * (Calibration Type): Specifies the thermocouple type (e.g., CA for K, IC for J).
• ** (Probe Length): Indicates length in inches.
• Suffixes: 'G' denotes a grounded junction; 'U' indicates an ungrounded probe. The suffix 'GG' designates fiberglass insulated lead wire, which is not available for the 1.5 mm (1/16") diameter option.

Variations in model numbers also reflect differences between standard PFA insulation and high-temperature glass or fiberglass options, as well as distinctions between grounded, ungrounded, and exposed junction types.

  • Heavy Duty Aluminum Handle
  • 1 /16 ', 1 /8 ', 3 /16 ', and 1 /4 ' Diameters
  • 300 mm (1 ft) Retractable Cable Expands to 1.5 m (5 ft)
  • Probe Leads Terminate in a Male SMP Miniature Connector
Cable Length5 ft
Color Code StandardANSI
Electrical ConnectionMiniature Male Thermocouple Connector
InsulationTPE
Process Temperature, Min0 °C
Series IDMHP-KSS
Temperature Sensor TypeThermocouple
Wire Gauge28 AWG
  • Download

    Data Sheet - MHP Heavy Duty Aluminum Handle Thermocouple Probe

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more