OptiPac

The OptiPac Leak Detection System is a deterministic non-destructive technology designed specifically for multi-cavity blister packs. OptiPac utilizes volumetric imaging under vacuum with topographic imaging to detect the presence and location of leaks.The OptiPac is engineered and designed with One-Touch Technology to achieve a rapid test cycle  requiring no changeover or sample preparation. Operators simply place the blister package  on the test plate and press the START button. Within seconds, the operator sees a definitive  pass/fail result, and a visual identification of blister cavity defects. OptiPac technology is unique in that it can provide rapid detection of sub-5-micron defects depending on blister cavity volume. OptiPac requires no tools for different blister formats.

 

The OptiPac Blister Package Inspection System is specially designed for practical operation, sensitivity and reliability. OptiPac utilizes volumetric imaging technology: a deep algorithm with multi-imaging under vacuum. The operator selects a recipe for the blister package using the HMI touch screen and places the blister pack on the test plate in any orientation. After pressing the start button, vacuum is pulled to a defined vacuum. The blisters expand under vacuum, driving air out of the blister through any leaks present. If there is a leak in the blister, the air escapes into the chamber leaving a collapsed blister cavity. During the dynamic vacuum test sequence, a volumetric image and measurement reading is taken that determines which blister cavities are defective. A definitive pass/fail result is displayed as well as the quantitative measurement for each package tested.