Starting at $8,408.75CAD

OxyTrans-EX Oxygen Transmitter

Name: OxyTrans-EX Oxygen Transmitter
SKU: placeholder-oxytrans-oxygen-transmitter
Price: 8408.75 CAD
Availability: InStock

Easy to use, accurate and economical way to measure oxygen at trace and % levels

Starting at

$8,408.75CAD

Have questions? We're here to help!

Call

Configure

Used in

4-20 mA Loop Powered Two Wire Oxygen Transmitter
The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.

Measuring Range
The unit will offer ranges between 0-100ppm, 0-1,000ppm, 0-10,000ppm of oxygen. 0-1% to 0-25% O2.

Sensor
The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.

Calibration
The calibration of the instrument for trace oxygen measurements in gas should be done with a known calibrated gas. The concentration can be chosen freely within the measuring range.

Flow-Through Measuring Cell in Stainless Steel
The measuring cell is modular and made of stainless steel. A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit.

• A 2 wire explosion-proof in-line oxygen transmitter
• 4-20mA output
• Display: 6 digit alphanumeric with bar graph
• 5 ranges offered: 0-100 ppm, 0-1,000 ppm, 0-10,000 ppm, 0-1%, 0-25%
• Oxygen sensor: a micro fuel cell
• Easy, accessible potentiometer

Measuring Range:	O2 PPM Range: 0-100ppm, 0-1,000ppm or 0-10,000ppm % O2 Range: 0-1% or 0-25% Range must be specified at time of ordering.
Calibration:	With calibrated gas, air
Accuracy:	± 2% FSD T = constant ± 5% FSD 0>T>50°C
Resolution:	0.1 ppm at 0-100 ppm 1 ppm at 0-1,000; 0-10,000 ppm 0.1%
Response Time:	90% FSD at 25°C 0-10 ppm < 45 s 0-100 ppm < 20 s 0-1,000 ppm < 10 s
Operating Temperature:	0 - 50°C
Pressure:	0.1 - 1 bar
Signal Output:	4 - 20 mA/DC
Alarm Value:	3.8 mA (Standard) or 23mA (if desired)
Voltage:	10 - 35 VDC
Load Range:	100 to 750 ohm Typical: 470 ohm
Display:	6 Digits, alphanumeric with bar graph
Oxygen Sensor:	Micro-Fuel Cell
Housing:	IP65
Dimensions:	120mm x 160mm x 65mm (L X H X W)
Weight:	1.2kg (2.6lb)