Skip to main content
Press Enter
OMEGA

P-M-1 Ultra Precise RTD Sensors for Industrial Applications

Provide customers w/ a product that offers sensor accuracies that are far tighter than are available in most standard RTD sensors

Have questions? We're here to help!
Have questions? We're here to help!

 Omega's line of Ultra-Precise RTD temperature sensors provide customers with a product that offers sensor accuracies that are far tighter than are available in most standard RTD sensors on the market today. These sensors are manufactured using DIN Platinum RTD elements (temperature coefficient = .00385 ohm/ohm/°C) with Class A, Class 1/3DIN or Class 1/10DIN accuracies. This makes Omega's Ultra-Precise RTDs among the most accurate industrial temperature sensors available.

 
These sensors are available in two styles:
Type P-M style closed ended immersion sensors for use where the sensors will be immersed in a fluid.
Type P-L style exposed element sensors for use in direct contact with air or gasses for more accurate measurement of these substances.
 
There are four probe diameters available including 3mm, 6mm, 1/8" and 1/4", with lengths starting at 50mm (2") with a number of standard lengths available (see ordering table below). A variety of mounting threads are available including: 6x1mm, 8x1mm, 10x1mm, 1/8NPT, 1/4NPT, 3/8NPT and 1/2NPT (Note: 6mm mounting threads are not available on 6mm diameter probes).
Please note that 1/8" and 3mm diameter probes without threaded fittings and with "-P", "-PS", "-TS", "-GS" and "-S" cables include a transition fitting at the end of the sheath to accommodate the cable diameter. If a transition fitting is not acceptable, then a type "-T" or "-G" cable must be specified.
 
Please note that the minimum recommended length for 1/10DIN accuracy probes is 6” for 1/4" (150mm for 6mm) diameter probes, and 4” for 1/8” (100mm for 3mm) diameter probes. This is due to the fact that in order to achieve these accuracies all stem conduction effects in the sensor must be eliminated. Also, please note that in order to lab certify 1/10DIN accuracy RTDs, it may be necessary for the probes to be longer than these lengths depending on the test equipment used to perform the certification. Omega can make these products shorter than the recommended lengths, but we cannot guarantee their performance. For 1/3DIN probes, a minimum length of 4.75" applies for 1/4" (120mm for 6mm) probes and 2.38" for 1/8" (60mm for 3mm) diameter probes.
• Pt100 (100Ω @ 0ºC 0.00385Ω/Ω/ºC) Platinum RTDs with 1⁄10 DIN, 1⁄3 DIN, or Class “A” Accuracies 
• Temperature Range -100 to 400°C (-148 to 752°F) Depending on Cable and Accuracy Selected
• 4-Wire Construction in 6 and 3 mm (1⁄4 and 1⁄8") Diameters 
• A Range of Mounting Threads and Cable Materials are Available
  • Thumbnail of document Data Sheet - P-M-1 Ultra Precise RTD Sensors for Industrial Applications
    Download

    Data Sheet - P-M-1 Ultra Precise RTD Sensors for Industrial Applications

    Download

Request a Service Quote

Get a customized quote for calibration, validation, repair, or training services designed to keep your instruments accurate and compliant.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more