Starting at $2,397.00CAD
Configure
Precision Digital

PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter

Offers all functionality of the PD7000, approved explosion-proof, accepts direct temperature input

Starting at
$2,397.00CAD
Have questions? We're here to help!
Have questions? We're here to help!
Call
Email
Configure
Used in
PD8 7000 Prot EX MAX Explosion Proof Temperature Meter 00761

The ProtEX-MAX™ PD8-7000 offers all the functionality of the ProVu PD7000 as a fully FM, CSA, ATEX, and IECEx approved explosion-proof product. It accepts a direct temperature input from a wide range of temperature measurement devices (type J, K, T, E, R, S, B, N, and C thermocouples and 100 or 1000 Ω platinum, 10 Ω copper, 120 Ω nickel RTDs). It displays the measured temperature in either degrees Fahrenheit or degrees Celsius on a dual-line, 6-digit Sunbright sunlight readable display. The meter includes automatic cold junction compensation for thermocouples and the ability to average up to ten (10) RTD sensors. The PD8-7000 can be equipped with up to four internal relays and a 4-20 mA analog output. It can be programmed and operated without opening the housing by using the built-in SafeTouch® through-glass buttons or the RS485 serial communication port with free Modbus® protocol.

               

Quick Overview

• Input: Thermocouple J, K, T, E, R, S, B, N, C; RTD 100 Ω Pt, 10 Ω Cu, 120 Ω Ni, 1,000 Ω Pt; Modbus PV (slave)
• Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
• Case: Smooth die-cast aluminum explosion-proof
• Power: 85-265 VAC or 12-24 VDC option
• Operating Temperature: -20 to 65°C
 

• J, K, T, E, R, S, B, N, C Thermocouples
• 100 or 1000 Ω Platinum, 10 Ω Copper, 120 Ω Nickel RTDs
• 1° or 0.1° Resolution
• Averages up to 10 RTD Sensors
• Automatic Cold Junction Compensation
• Universal 85-265 VAC or 12/24 VDC Input Power
• Large Dual-Line 6-Character Display, 0.60" & 0.46"
• Flanges for wall or pipe mounting
• SafeTouch® through-glass button programming
• SunBright Display Standard
• 2 or 4 Relays + Isolated 4-20 mA Output Options
• USB, RS-232, & RS-485 Serial Communication Options
• Modbus® RTU Communication Protocol Standard
• On-Board Digital Input
• Onboard USB and MeterView® Pro Programming Software

DisplayUpper display: 0.60" (15 mm) high. Lower display: 0.46" (12 mm) high. Both are 6 digits (-99999 to 999999), red LEDs.
Resolution1° (up to four digits) or 0.1° (up to five digits)
Display IntensityEight intensity levels
Display Update Rate5/second (200 ms)
Programming MethodsFour through-glass SafeTouch buttons, four mechanical buttons behind glass, digital inputs, PC and MeterView Pro software, or Modbus registers.
F4 Digital Input Contacts3.3 VDC on contact. Connect normally open contacts across F4 to COM.
F4 Digital Input Logic LevelsLogic High: 3 to 5 VDC; Logic Low: 0 to 1.25 VDC
Noise filterProgrammable from 2 to 199 (0 will disable filter)
Filter BypassProgrammable from 0.1 to 99.9% of span
RecalibrationRecommended at least every 12 months.
Max/Min DisplayMax / min temperature readings are stored until reset by the user or until power to the meter is cycled.
Non-Volatile MemoryAll programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
Power Options85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max, or optional model with 12-24 VDC ±10%, 15 W max.
Normal Mode RejectionGreater than 65 dB at 50/60 Hz
Isolation4 kV input/output-to-power line. 500 V input-to-output
EnvironmentalT6 Class operating temperature range Ta = -40 to 60°C
T5 Class operating temperature range Ta = -40 to 65°C
Max Power DissipationMaximum power dissipation limited to 15.1 W.
ConnectionsRemovable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
EnclosureExplosion-proof die cast aluminum with glass window, corrosion resistant epoxy coating, color: blue. NEMA 4X, 7, & 9, IP68. Default conduit connections: Four ¾" NPT threaded conduit openings and two ¾" NPT metal conduit plugs with 12 mm hex key fitting installed. Additional conduit opening configurations may be available; verify quantity and sizes on specific device labeling during installation.
MountingFour slotted flanges for wall mounting or NPS 1½" to 2½" or DN 40 to 65 mm pipe mounting
Overall Dimensions (W x H x D)6.42" x 7.97" x 8.47" (163 mm x 202 mm x 215 mm)
Weight16.0 lbs (7.26 kg)
USB ConnectionCompatibility: USB 2.0 Standard, Compliant
Connector Type: Micro-B receptacle
Cable: USB A Male to Micro-B Cable
Driver: Windows 98/SE, ME, 2000, Server 2003/2008, XP 32/64-Bit,
Vista 32/64-Bit, Windows 7 32/64-Bit, Windows 10 32/64-Bit
Power: USB Port
Warranty3 years parts & labor
  • Thumbnail of document Data Sheet - PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter
    Download

    Data Sheet - PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter

    Download
  • Thumbnail of document Manual - PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter
    Download

    Manual - PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter

    Download
  • Thumbnail of document Software - PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter
    Download

    Software - PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter

    Download

Accessories

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more

Sign up to receive email updates on new product launches, promotions, news, blogs, Brand's Brands videos and so much more!