Skip to main content
Press Enter
OMEGA

PR-16 Small Diameter RTD Probes

Fine Diameter 1/16" and 1.5mm RTD (PT100) Probes

Normally ships in
3-4 weeks
Have questions? We're here to help!
Have questions? We're here to help!
Configure

Supported Applications

The Omega PR-16 series consists of handheld RTD (Resistance Temperature Detector) utility handle probes designed for portable temperature measurement. The series features an easy-grip molded handle and a retractable cable system, allowing the probe to be stored in toolboxes or other locations for convenient access during field operations.

Operating Conditions & Performance

The PR-16 series offers three distinct model variants—PR-16L (Low), PR-16H (High), and PR-16E (Extreme)—each covering specific process temperature ranges. The PR-16L supports -58 to 250°C (-58 to 482°F). The PR-16H covers -50 to 450°C (-58 to 842°F), while the PR-16E extends from -200 to 600°C (-328 to 1112°F).

Accuracy specifications vary by model and temperature span. The PR-16L provides Class A accuracy across its range. For the PR-16H, performance is Class A from -50 to 300°C (-58 to 572°F), or else Class B outside this interval. The PR-16E delivers Class A accuracy from -100 to 450°C (-148 to 842°F), with Class B performance elsewhere.

Response time (T90) depends on the probe diameter and model variant. For example, a 1/8" PR-16L responds in 2.4 seconds, whereas a 1/8" PR-16E requires 9 seconds under comparable conditions. All models utilize standard PT100 Ω or PT1000 Ω elements with a TCR of 0.00385 Ω/Ω/°C.

The series meets specific mechanical durability standards: IEC 60068-2-6 for vibration (5 to 2000 Hz sweep rate, one active per minute; number of sweep cycles 10 and acceleration 5g) and IEC 60068-2-27 for shock (50g/11ms). Ingress protection is rated IP67 for PR-16L and PR-16E models.

Configuration Options

The series supports a wide range of configurable dimensions to accommodate different installation needs:

• Diameters: 1/8, 3/16, and 1/4 inch options are available across all models.
• Probe Lengths: Standard lengths include 2, 3, 4, 6, 12, 18, and 24 inches. Custom lengths may be built using the manufacturer's configurator.
• Cable System: A 3-conductor retractable cable is standard at 1 foot in length but expandable to 5 feet. The wire material is TPE (coiled).
• Termination: Standard termination consists of stripped-end lead wires; other terminations may be configured.

Key Product Differences

The PR-16 series distinguishes itself through three primary model families defined by temperature capability and ingress protection. The PR-16L (Low) variant is optimized for lower temperatures up to 250°C with Class A accuracy throughout its range and includes IP67 rating. The PR-16H (High) model extends the upper limit to 450°C but does not carry an ingress protection rating in the specification table; it maintains Class A accuracy only within a narrower band (-50 to 300°C). The PR-16E (Extreme) variant covers the widest range from -200 to 600°C, includes IP67 protection, and offers faster response times than standard probes at equivalent diameters due to its specific construction.

All variants share identical nominal resistance standards (100 Ω or 1000 Ω at 0°C) and TCR values. Differences in performance are strictly tied to the selected temperature range model and probe diameter, which directly influence response time metrics as documented in the specification table.

  • Long handle with strain relief for easy-grip
  • Low temperature range: -50 to 250°C (-58 to 482°F)
  • High temperature range: -50 to 450°C (-58 to 842°F)
  • Extreme temperature range: -200 to 600°C (-328 to 1112°F)
AccuracyClass A
Accuracy DetailClass A from -100 to 450°C (-148 to 842°F); or else Class B
Cable Length5 ft
Enclosure RatingsIP67
InsulationTPE
Nominal Resistance100 Ω
Number of Wires2
Probe TypeImmersion Probe
Resistance/Curve Note100 Ω and 1000 Ω at 0°C standard;TCR = 0.00385 Ω/Ω/°C standard
Series IDPR-16
ShockIEC 60068-2-27; 50g/11ms (15 probes tested together) Duration: 1 day
Temperature Coefficient0.00385 Ω/Ω/°C
Temperature Coefficient Noteα = 0.00385 Ω/Ω/°C
Temperature Probe StyleImmersion Probe
Temperature RangeExtreme
Temperature Sensor TypeRTD
VibrationIEC 60068-2-6; 5 to 2000 Hz sweep rate, one active per minute; number of sweep cycles 10 and acceleration 5g (15 probes tested together) Duration: 1 day
Wire Gauge28 AWG
  • Download

    Data Sheet - PR-16 Small Diameter RTD Probes

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more