Skip to main content
Press Enter
OMEGA

PR-26SL Spring Loaded Vibe Resistant RTD Probes w/M12 Connectors

Spring Loaded RTD Sensors with M12 Connectors

Normally ships in
3-4 weeks
Have questions? We're here to help!
Have questions? We're here to help!
Configure

Supported Applications

The Omega PR-26 Series consists of vibration-resistant and bendable RTD (Pt100 or Pt1000) probes designed for temperature measurement in environments subject to mechanical stress. These integral connector probes feature an all-welded 316L stainless steel housing, providing a robust solution where standard rigid sensors may be susceptible to failure from shock or vibration.

Operating Conditions & Performance

The PR-26 series operates across a process temperature range of -50 to 500°C (-58 to 932°F). The sensing end is rated for temperatures up to 250°C (-58 to 482°F) within this envelope. Accuracy performance adheres to IEC Class A and IEC Class B standards, with specific tolerances of ±0.15°C @ 0°C (Up to 300°C) and ±0.30°C @ 0°C (300 to 500°C).

These probes are vibration tested to MIL-STD-202G, Method 204D, Test Condition A, enduring 10g's from 10 to 500 Hz for units 6" long or shorter. The standard probe diameter is ¼", with a minimum overall length of 2½".

Key Performance Specifications

• Measurement Type: RTD (Pt100 or Pt1000)
• Accuracy Class: IEC Class A and IEC Class B
• Vibration Rating: MIL-STD-202G, Method 204D, Test Condition A (6" Long or Shorter)
• Housing Material: All Welded 316L Stainless Steel
• Sheath/Wetted Materials: 316L Stainless Steel

Configuration Options

The PR-26 series offers extensive configurability to match specific installation geometries and electrical requirements. The probes feature an integral 4-Pin M12 Connector for direct connection, eliminating the need for separate junction boxes in many applications.

Configurable Options

• Sensor Elements: Available with Pt100 or Pt1000 elements; Class A and Class B accuracy options are supported depending on model selection.
• Mounting Threads: Models include ¼ NPT, ⅜ NPT, and ½ NPT mounting threads. Variants without a mounting thread (None) are also available for direct insertion or custom clamping.
• Diameters: Standard configurations utilize a ¼" diameter; variants with an 1/8" diameter are listed in the series inventory.
• Lengths: While standard catalog models often list lengths such as 6.00 inches, custom insertion lengths are supported by modifying the model number (e.g., changing "0600" to "0900" for a 9" length).
• Bendability: Probes are bendable after the first 2½" of the probe tip. A minimum suggested bend radius is 2x the probe diameter.

Cabling and Accessories

The series supports separate cable options for extension or replacement, including:

• M12CM-T24SSPC-SF-2 cable (sold separately)
• M12CM-T24SSPC-RF-2 cable (sold separately)

Wiring Configurations

The standard wiring configuration is indicated by the suffix "-1" in the model number. An alternative option 2 wiring configuration is available, designated by changing the suffix to "-2", with no additional charge.

Key Product Differences

Variants within the PR-26 series are distinguished primarily by their mounting thread type and sensor element specifications. The model number structure follows the pattern: PR-<Series>-<Element>-<Length>-<Diameter>-<Mounting Thread>-<Connector>.

Model Number Distinctions

• A Series: Models such as PR-26A denote probes with no mounting thread (None).
• B, C, D Series: These prefixes correspond to specific NPT threads: B indicates ½ NPT, C indicates ⅜ NPT, and D indicates ¼ NPT.

The series supports both Pt100 (e.g., PR-26A-3-100-A) and Pt1000 (e.g., PR-26A-3-1000-A) elements. Accuracy class is embedded in the model code, with "A" representing IEC Class A and "B" representing IEC Class B.

For lengths other than 6", users must modify the length segment of the part number (e.g., "0900" for 9") which incurs additional cost per inch greater than 6". The standard minimum overall length is 2½".

  • Operating range: -50 to 500°C (-58 to 932°F) sensing end, -50 to 250°C (-58 to 482°F) at connector
  • All welded 316L SS housing and probe available with or without NPT mounting threads
  • Pt100 or Pt1000 RTD, Class A accuracy from -50 to 300°C (-58 to 572°F)
  • 1/4" diameter, custom lengths available
Accuracy DetailPt100 or Pt1000 4-Wire Platinum RTD Elements (IEC60751) Class A from -50 to 300°C, Class B from 300 to 500°C
Color Code StandardANSI
Connector Temperature, Max250 °C
Connector Temperature, Min-50 °C
Electrical ConnectionM12 4 pin Male
Number of Wires4
Operating Temperature, Min-50 °C
Series IDPR-26-Standard
Sheath Material316L Stainless Steel
Temperature Sensor TypeRTD
Thermocouple TypeN/A
  • Download

    Data Sheet - PR-26SL Spring Loaded Vibe Resistant RTD Probes w/M12 Connectors

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more