`
Simple to install, reliable rugged paddlewheel flow sensors that offer exceptional value with little or no maintenance
Flow sensor has a process-ready open collector signal with a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s)
Combines stainless steel construction with insertion paddlewheel technology
Flow meter with low flow capabilities down to 0.1 m/s (0.3 ft/s), digital (S3L) and 4 to 20 mA outputs (multi-function)
Insertion-style magnetic flow sensor that features no moving parts, optional display
Metal magmeter installs into standard ISO 7-R 1¼ or ISO 7-R 1½ (1¼ in. to 1½ in. NPT) pipe outlets, and is adjustable to fit pipes from DN50 to DN2550 (2 to 102 in.)
Flow meter for small applications, provides accurate readings in two flow ranges; 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm)
Sensor offers two flow ranges starting at 0.11 or 1.13 lpm (0.03 or 0.3 gpm), for clean process liquids, regardless of fluid color or opacity
Flow sensor contains a free-running rotor that is driven by the fluid flow
Two channel transmitter/controller can support two sensors of same or different types in one instrument
Transmitter provides single channel interface, multi-parameter input selection
Non-invasive clamp-on ultrasonic sensor for dry servicing, transit time measurement technique, optional data logger
Portable ultrasonic flow meter, transit time measurement technique, 0.1 m/s to 20 m/s flow velocity range
Cost effective clamp-on flow meter can either be used as a stand alone meter or as an integral part of a control loop
Battery operated flow totalizer is compatible with the Signet 515 and 525 flow sensors, and will provide years of dependable operation
DryLoc® connector with corrosion-resistant gold-plated contacts readily connects the sensor to the mating 2760 preamplifier or the 2750 sensor electronics
Features a patented reference electrode design and uses the unique foul-proof patented DryLoc® connector
pH and ORP Electrodes feature a unique foulproof DryLoc® connector with gold-plated contacts featuring a PTFE double reference junction
Temperature sensor has a one-piece injection molded PVDF body that is ideal for use in high purity applications
Available in various configurations for maximum installation flexibility
2 wire compact sensor, non-contact level measuring, 4 to 20 mA/HART interface
Conductivity/Resistivity electrodes are designed to provide versatile installation and accurate sensing across a very broad dynamic range
Optical DO measurement with no flow requirements, calibration built into the measurement cap - 2% of range, 0 to 20 mg/L
2-wire compact transmitters, non-contact level metering, 4 to 20 mA/HART interface
Conductivity/Resistivity Electrodes are available in four cell constants from 0.01 to 10.0 cm-1, 316 SS electrodes with injection molded PVDF
Submersible hydrostatic pressure sensor for level and depth control, 4-20 mA or digital output
On site probe length configuration, 2 to 4 individual switching points integrated in one sensor
Economical float switch for control of liquids in small tanks, PP and PVDF version available
High corrosion resistant in most liquids, relay output, 1" and 3/4 " threaded mounting
Guided wave radar level transmitter for continuous level measuring of conductive or non-conductive liquids, pulps and solids
Maintenance free vibrating principle, independent of the liquid conductivity, dielectric constant, viscosity, pressure and temperature
Hermetically molded, double chamber, mercury free operated micro switch
Pressure sensor has a one-piece injection-molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids
Differential pH & ORP electrodes are built with the DryLoc® connector, a Ryton® body, and a PTFET reference junction
Radially-installed dismountable meters for measuring the rate of flow in industrial pipework applications, multiple scale ranges
Measures flow, pH, ORP, conductivity, pressure, level, temperature and dissolved oxygen