An extremely fast, accurate, repeatable, and customizable mass flow meter
Calibrate on the go with the fastest flow verifier in the world
Secondary calibration standards that can go anywhere to verify the operation of flow equipment
Measures flow in partially filled pipes and open channels, 4-20mA and Relay outputs for connection to Samplers and SCADA
Non-contacting flow monitoring designed for slurry applications, isolated 4-20mA Output
Insertion magmeter is the accurate, low cost alternative to full-bore magnetic flow meters
Portable non-contacting flow measurement of clean, non-aerated liquids like water, chemicals and oils with less than 2% solids or bubbles
Recommended for clean fluids like water, glycol, oil and most chemicals, sesnors can be mounted without shutting down flow, 4-20mA output
Compact, battery-powered logger with an ultrasonic sensor for flow monitoring through open channels, partially full sewer pipes and surcharged pipes
Responsive gas flow control with minimal system impact, pressure drops as low as 4 mbar
Cost-effective, high-precision and stable transmitter for measuring air velocity and temperature
Modular, compact design, thermal measuring principle and hot film sensor element
Thermal mass flow meter for compressed air and gases, 1/2 in (DN15) to 3 in (DN80) sizes available
Monitors compressed air, nitrogen, CO2 or other non-corrosive and non-flammable gases, DN50 - DN700 (2 in - 28 in) and up to 16 Bar (232 PSI)
For high pressure applications, handles ranges between 30 PSIA and 320 PSIA (1.03 to 22 bar)
Control flow in both directions with the world's first bidirectional mass flow controller
Easy upgrade for aging or underperforming thermal flow controllers
Monitor liquid flows down to 0.01 ccm with the fastest meter response time available in a liquid flow meter (20 ms)
Control liquid flows down to 0.1 CCM with the fastest control response time available in a liquid flow controller (100 ms)
Stainless steel housing, compact design fits challenging applications, standard backlit graphic display, ± 0.20% accuracy
Economical, accurate, 316 stainless steel construction (including rotor), two piece design allows for easy access to internals for inspection
Life sciences, 316 stainless steel construction (including rotor), two piece design allows for easy access to internals for inspection
Removes air or gas present in product streams, located after the pumping device in a positive pressure line
Offers a sanitary all in one design where the clamp connection is one piece with the sensing element
Simple to install, reliable rugged paddlewheel flow sensors that offer exceptional value with little or no maintenance
Flow sensor has a process-ready open collector signal with a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s)
Combines stainless steel construction with insertion paddlewheel technology
Flow meter with low flow capabilities down to 0.1 m/s (0.3 ft/s), digital (S3L) and 4 to 20 mA outputs (multi-function)
Insertion-style magnetic flow sensor that features no moving parts, optional display
Metal magmeter installs into standard ISO 7-R 1¼ or ISO 7-R 1½ (1¼ in. to 1½ in. NPT) pipe outlets, and is adjustable to fit pipes from DN50 to DN2550 (2 to 102 in.)
Flow meter for small applications, provides accurate readings in two flow ranges; 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm)
Sensor offers two flow ranges starting at 0.11 or 1.13 lpm (0.03 or 0.3 gpm), for clean process liquids, regardless of fluid color or opacity
Flow sensor contains a free-running rotor that is driven by the fluid flow
Battery operated flow totalizer is compatible with the Signet 515 and 525 flow sensors, and will provide years of dependable operation
Radially-installed dismountable meters for measuring the rate of flow in industrial pipework applications, multiple scale ranges
Non-invasive clamp-on ultrasonic sensor for dry servicing, transit time measurement technique, optional data logger
Portable ultrasonic flow meter, transit time measurement technique, 0.1 m/s to 20 m/s flow velocity range
Cost effective clamp-on flow meter can either be used as a stand alone meter or as an integral part of a control loop
Designed for long service life and maintenance-free operation, easy installation with included coupling adapters
Economical, brass body, multi-jet water meter with pulsed output, easy installation with included coupling adapters
Flow ranges up to 1000 L/min and offered in aluminum or 316 SS in 1/4 in, 3/8 in, 1/2 in and 3/4 in sizes
PPS body, 0 - 5 VDC output, 3-1/2 digit LCD, turbine wheel and electro-optical detection
PPS body, turbine wheel and electro-optical detection, 0 - 5 VDC output signal, pulse outputs
3-1/2 digit LCD informs the user of the actual flow rate, 316SS Body, 0 - 5 VDC output
Rugged 316SS body, high repeatability & microturbine design, 0 - 5 VDC and pulse outputs
PPS body, 0 - 5 VDC output, 3-1/2 digit LCD informs the user of the actual flow rate
Corrosion resistant PPS body, accurate measurement of flow rates with zero drift, 0 - 5 VDC output, no required maintenance
Economical flow indication, multiple sensing point measurement & built in averaging capability
Batch or cumulative totals, easy-to-read LCD display, ± 5% accuracy
Weatherproof and subermersible, multiple wetted material choices, available in brass or 316 SS body
Non-invasive pipe flow measurement, compact and lightweight design, 4 - 20 mA and pulse output capabilities and easy operation
Easy operation and data logging option, sturdy IP65 rating, 4 - 20 mA and pulse output capabilities
Portable and non-invasive, capable of 20 hours continuous operation with built-in, rechargeable battery
Portable high-performance data logging capability that is capable of 20 hours of continuous operation
All in one clamp-on unit, easy to read text with backlight, volume pulse and 4 - 20 mA flow rate output
An extremely fast, accurate, repeatable, and customizable mass flow meter for use with corrosive gases
High-accuracy, multivariate flow measurement with minimal system impact
An extremely fast, accurate, repeatable, and customizable mass flow meter for high pressure applications
Calibrate corrosive gases on the go with the fastest flow verifier in the world
Calibrate low-pressure gases on the go with the fastest flow verifier in the world
Calibrate high-pressure gases on the go with the fastest flow verifier in the world
Control responsively and stably with the fastest mass flow controller in the world for corrosive gases
Control flow in both directions with the world's first bidirectional mass flow controller for corrosive gases
Control flow in both directions with the world's first bidirectional mass flow controller with low pressure drop
General use direct reading precision flow meters suitable for both gas and liquid applications with 2 in, 5 in, or 10 in scales and interchangeable bodies
Monitor water flow rates from 0.25 GPM - 40 GPM and air rates from 1 SCFM - 100 SCFM with this ultra-pure laboratory grade dual-scale flowmeter
For air, water or caustic fluids, with ± 2% FS, unrestricted mounting, and high temperature and pressure options
Hot-stamped scales and multi-angle views of flow backed by over 60 years of experience in acrylic instrument machining
Direct reading, precision machined acrylic flow meter used to indicate air or water flow suitable for both gas and liquid applications
Three ranges to 20 GPM water housed in a brass body of shatterproof construction
2 in or 1-1/2 in scale with a configurable valve option suitable for both gas and liquid with advanced features at a low cost
Measures flow rate of relatively clean, non-aerated liquids like potable water, raw water, cooling water, de-ionized or reverse-osmosis water, oils and chemicals in full pipes
Accurate non-contacting flow measurement of "difficult" fluids from outside a pipe
Recommended for clean fluids like water, glycol, oil and most chemicals, ultrasonic sensors clamp on outside of pipes from 0.51" to 78" (13 to 2000 mm) outside diameter
Measure flow through partially filled pipes, channels, canals and turnouts without a flume or weir
Offers exceptional accuracy in a broad array of precision ultra-low flow and high pressure applications
Doppler flow meter for troubleshooting, balancing and checking performance of permanent flow meters, recommended for difficult liquids
Control responsively and stably with the fastest mass flow controller in the world
Measures flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes
Accurate non-contacting ultrasonic sensor measures flow from outside a pipe, built-in data logger
Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir
Non-contact ultrasonic monitor used to measure and control liquid level or to monitor and totalize open channel flow through any flume or weir
Continuously monitor, display, totalize and data log flow through any flume or weir