Edgetech Instruments

Diffusion cap for the HPP125 probe, no filter- open pore

Spare filter for the HPP125 probe, 100 micron

Spare smart sensor tip, includes NIST traceable certificate RH/T/DP/P

RS-232 single ended serial cable for interface

Foam lined transportation case specified to protect instrumentation during shipping

Heated 1/4" teflon tubing with length and power options

Replacement o- ring kit for the X3SF sensor

Replacement humidity generator seals, red, seals the SS tube during transportation

Stainless steel sintered filter, 30 microns with fittings

Rated for 150 PSIG, The HP125 gets installed into a 3.5 inch diameter PVC threaded pipe flange, 4 bolt install, includes rubber gasket

Rated for 300 PSIG, The HP125 gets installed into a 3.75 inch diameter 304 SS Threaded Pipe Flange, 4 bolt install, includes rubber...

Trace moisture sensor with stainless steel flow through head

Micro-fuel cell for % or ppm range

Micro-fuel cell only for CO2 and Oxidizer background gas

Includes wafer replacement and membrane kit

Wafer replacement only, this is the moisture sensor element (wafer) plus mounting parts

Sample chamber,flow through, 316 SS with 1/8” NPT inlet & outlet ports

Sensor complete with sample chamber

Sensor cable with connectors

1 " male NPT probe penetration fitting

3/4" male NPT probe penetration fitting

Can be riveted or wire connected to the instrument

Spare seals for probe access ports

DrieRite 1 or 5 LB jar

Sampling chamber for use with Edgetech's humidity probes.

Compact, self-contained unit, which draws a regulated sample gas flow through the chilled mirror sensor.

Air temperature probe, stainless steel sheath with 10 foot cable and connector.

Designed for accurate pressure measurement of gases or liquids compatible with stainless steel.

Ideal instrument for indoor air quality and indoor environmental quality measurements of temperature and humidity

Standard ambient air probe up to +70°C, RH (2%) accuracy

O-ring for the AcuDew transmitter

¾”-16 UNF to ¾” NPT(M) process connection adaptor

Sampling assembly for easy and quick installation of the AcuDew moisture transmitter

AcuDew sample cells with tube fittings

Transmitter cable connector for the AcuDew

Machining probe with left or right position options, this is the sample intake port mounted on aircraft outside skin

Plug-in humidity probe head replacement

Wireless module - USA / CA

RS232 data transfer cable, 5.9 ft

Recharger with 4 NiMH rechargeable batteries

Up to +70°C, RH (1%) accuracy, probe Ø 21 mm, 0 to +100 %RH, -4 to 158°F / -20 to +70°C

Precise compressed air pressure dew point HPD probe,

Standard compressed air pressure dew point HPD probe, 300 mm length

4 to 20 mA loop-powered display, connects directly on AcuDew

Rugged shipped case for transportation of Oxymaster

Sensor guard for the AcuDew transmsitter

Plastic protective cover

Handle for RH probe head 625, includes 3.9 ft / 1.2 m cable