Michell Instruments

HC dew-point sensor cell assembly (with Storm pressure transmitter)

Michell standard mounting frame, floor standing w/ sun canopy & 3 sides- 316 box section construction w/ roof & side panels

Sintered Aluminium Guard, Anodised with Inert PTFE coating

Extended Heatsink

Sensor sampling block (SS with 1/8" NPT in/out threaded gas ports)

OPT401 transport case

MDM300 battery pack for MDM300-IS for serial Number versions S/N 165024 onwards

Connector for remote pressure or temperature sensors

Kit includes high pressure metering valve, flow meter 1/8" stainless steel sample tubing, camozzi silencer.

Polymer adapter ø19mm to ø6mm PRT

1/4" Swagelok to 1/8” BSPT Adaptor

6mm Swagelok to 1/8” BSPT Adaptor

25mm x 3mm Viton O-Ring for Orifice Boss (x1)

Sensor lock nut (to mount sensor to panel or bulkhead)

M36 bonded seal for the dew-point sensor

8GB SD card

6 & 8 Way Plugs for Outputs/Alarms

Dew-point and temperature probe mounting bracket

1/2” VCR Washer for sensor to sensor block connection

Transport case (MK2)

8GB SD card

Domnick Hunter pre-dryer (to dry PSD-4 air supply to -40°Cdp)

Ultra high performance dryer with 90Nl/min output (Range < -100°Cdp)

Ultra high performance dryer with high pressure output (Range < -100°Cdp)

Ultra high performance dryer (Range < -100°Cdp)

Pressure Swing Dryer

Hand Carry Strap

Packing for Main Unit with Sampling System (crate for air, sea & road)

Membrane filter elements pack of 5 + 5 Viton O-ring (systems up to October 2015)

Filter kit for Coalescer and Membrane Separator – each (systems from November 2015)

Stand alone heated pressure reduction system 240VAC (300 barg/4350 psig inlet, max 507psig/35barg outlet) - ATEX only Stand alone...

Remote PRT for all S8000 models, 2m cable with connector

High temperature cable (Temp Sensor OR pressure sensor) – 20m (Max 120°C)

High temperature cable (Temp Sensor OR pressure sensor) – 10m (Max 120°C)

High temperature cable (Temp Sensor OR pressure sensor) – 5m (Max 120°C)

19" Panel Mount Kit

Filter kit for Coalescer and Membrane Separator - each

Michell standard mounting frame, floor standing w/ sun canopy & 3 sides- 316 box section construction w/ roof & side panels

Sensor/Gas block replacement O-ring kit

Transit clamp (kit)

Vent particulate filter element 0.1µm

Outlet Millipore wafergard inline sealed particulate filter 0.003µm

MDM300 Series Easi-fit sampling kit with 1/4" fitting and filter

"MDM300 Series Easi-fit sampling kit for measurement at atmopsheric pressure Single metering valve on hygrometer inlet & flowmeter...

"MDM300 Series Easi-fit sampling kit for measurement at system pressure Single metering valve on hygrometer outlet & flowmeter

Legris Quick-Connect for 6mm PTFE Tubing to 1/8” BSPT Adaptor (LOW pressure only)

0.4mm Restricting Orifice Boss with 1/8” BSPT Entry (x1) (LOW pressure only)

4mm Free Flowing Orifice Boss with 1/8” BSPT Entry (x1)