Cannabis

Compression fitting connections, 1/8" tube to 1/8" NPT male

Surface mounting bracket for use with medium pressure or high pressure Magnehelic models only

Flush mount bracket for Capsuhelic gauge

Stand-hang bracket, aluminum, for Magnehelic® gage

Surface mounting plate, aluminum, for Magnehelic gage

Magnet assembly for 1222 manometers, 2 required (3 required for 1222-36 and M-1000).

Scale clamp bar for 1221 manometer

Stand-hang bracket, aluminum, for Minihelic® II gage.

Aluminum DIN rail - only available in 1 m length (2.8 ft).

Thermometer and terminal tube holder, stainless steel wire.

Gage plug with retainer loop, polyethylene plastic, for 1/4" ID tubing, slip loop over tubing OD and insert plug for seal.

Magnetic mounting, edge style, secures edge of acrylic manometer with No. 10-32 machine screw and boots insert.

Carbon steel adapter, 1/8" x 1-1/2" NPT.

Stainless steel adapter, 1/8" x 1-1/4" NPT.

1/8 x 1-1/4" NPT carbon steel adapter.

Terminal tube, brass, 1/4" diameter tube, 8" length

"T" assembly, plastic

Direct drive pressure gage brass adapter, 1/4 in male NPT to G 1/2 A parallel thread 1-1/2 in length

Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing

1-1/4 in to 3/4 in reducer, featuring an electrical rating of 3 A at 250 V AC

Brass adapter, 1/8" female NPT to 1/4" male NPT.

1/8" BSPT 316 SS filter vent plug (replacement filter for the A-464-SS)

1/8" pipe plug, socket hex, plated steel.

1/8" NPT close coupled street ell, brass

1/4" nylon tube union

5/16" nylon tube union

Compression fitting for 1/8 in NPT to 1/4 in metal tubing to connect a filter or muffler to the Dwyer Magnehelic and Capsuhelic gages

Gage connector for 1/4" tubing, slip fits in 3/4" opening in 250 Series AF gages (compression nut and ferrule not included).

Brass safety relief valve protects gages against over pressure

Instrument enclosure, 304SS, brushed finish, compatible with 2000 Magnehelic® gage, DM-2000 differential pressure transmitter

Weatherproof enclosure, ABS, compatible with Series 2000 Magnehelic®, DM-1000 DigiMag®, DM-2000, Series 605 (with -SS option),...

Weatherproof enclosure, ABS, compatible with Series 3000MR/MRS Photohelic®, Series 605 Magnehelic®, Series DH3 Digihelic®, Series...

Instrument enclosure, 304SS, brushed finish, compatible with 2000 Magnehelic® gage

ABS, compatible w/ Series 2000 Magnehelic®, includes 2 sections of precut silicone tubing, banjo fittings, & threaded pressure...

Rubber tubing to 1/4 in ID plastic tube for 1221, 1222, and 1227 manometers

Gage connector, 1/8" pipe thread opening, less OD thd., for slip fit in 3/4" dia opening in 250 Series AF gages.

Shutoff type gage connector for 3/16 in rubber tubing

Plastic 3-way vent valve

Plastic 3-way vent valve with 80 PSI rating

For use w/ Manometers, Magnehelic® Gages, Pressure Switches & other Controllers to pick up or sense static pressure drops

303 SS static pressure tip with mounting flange for 3/16 in ID rubber or plastic tubing

Static pressure tip for 3/16 in and 1/8 in ID plastic or rubber tubing

Flat aluminum bracket for flush mounting the Magnehelic gages

Flush mount surface mounting bracket for Magnehelic gage

Flat aluminum bracket for flush mounting Photohelic and Capsuhelic gauges

Dessicant vent filter for submersible level transmitters

Female four pin M-12 to cable gland connector

Protective rubber boot, 2.8" x 2.9" x 1.8", .35 lb.