Metrology

Spare alumina block with 5 wells for the 9117 annealing furnace

IEEE-488 interface (RS-232 to IEEE-488 converter box) for the 9011 calibrator and 9117 annealing furnace

IEEE-488 interface for the 9114 metrology furnace, and 2100 / 2200 benchtop temperature controller.

PressCal is a menu-driven software program for pressure calculation and certificate generation using a deadweight tester as the...

Quickly remove and consistently refit the pointer of a pressure gauge

Allows for calibration of two instruments at the same time

Angle adapter for calibration of gauges with the pressure connection on the rear to position the gauge at 90º

Thread adapters to make connections with the Fluke P5500 series hydraulic and pneumatic comparison test pumps, media separators, and...

Dirt / moisture trap for deadweight testers

Pressure range 0 to 3,000 PSI (210 bar)

Connect directly to a hydraulic deadweight tester or comparison test pump to separate fluids and protect the calibrator from...

Conversion weight sets for applications requiring nominal pressure increments in measurement units different than the main unit

Lines and fittings kit for the Fluke Calibration 2271A industrial pressure calibrator

Pressure measurement modules for the Fluke Calibration 2271A industrial pressure calibrator to extend your pressure range or improve...

Shipping case for three (3) pressure modules for the Fluke Calibration 2271 industrial pressure calibrator

Hard plastic case with foam insert for storage and transportation of the Fluke Calibration 2271A industrial pressure calibrator

System verification, PRT with readout, accredited, for the 1502A / 1504 and 1523 / 1524 thermometers

Connect your Fluke test took with the IR3000FC connector and get all the benefits of the Fluke Connect app

Attach it to a hard hat, baseball hat, or even a panel door for all the light you need

Set of push-on adapters for TL71 and TL75 test probes

One pair (red, black) with IC insulated caps to prevent shortening of IC legs for probing high-density components or boards

One pair (red, black) with tips which include banana-style spring contacts with nickel-plated brass ends

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals

SureGrip­ industrial test probes

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals

A handy all-in-one test kit includes three (3) different test lead sets

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks

1 pair (red, black) multi-stacking 4 mm banana plug patch cords, 60 cm

Electronic test probe set with very small 1 mm tips to access hard to reach test points

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more

This basic electronic test lead kit has the fundamental accessories for testing electronics, and includes the Fluke TL71 premium...

One pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plug

PVC insulated test leads with right-angle shrouded banana plugs recommended for general purpose measurements

Provides comfort grip probes with silicone insulated, right-angle test leads

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 mm - 76 mm

Silicone insulated leads useable from -80°C - 70°C (-112°F - 158°F)

Digital multimeter test leads (red, black) with safety shrouded, standard diameter banana plugs

Test lead set provides 5 ways to connect depending on the terminals

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers...

Digital multimeter test leads (red, black) with safety shrouded, standard diameter banana plugs

One pair (red, black) of silicone insulated leads with straight connectors on both ends

Test lead holder with 10 slots for wires

Five (5) pairs (red and black) of double 4 mm banana plugs, each with 3.1 mm for mounting wires and components

Probe pierces insulated wire making contact for accurate readings