Transportation

Measures gas pressure with ± 0.5% of full-scale accuracy, designed for easy installation, user selectable units

Calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or pressure switches

Able to generate pressure & vacuum for adjusting/calibrating pressure gages, transmitters, or switches

Wide variety of ranges, easy-open breather plug on top, 1.5% FS accuracy

Dual PSI and Bar (x100 kPa) scales with ± 1.5% full-scale accuracy, stainless steel housing and wetted parts

Perfect for applications where resistance to corrosion is necessary as the stainless steel case and ring offer protection from harsh...

Economical gage with selectable engineering units and with 1% or 0.5% accuracy for monitoring air and compatible gases or liquids

Visual monitoring and electronic control of very low differential pressure with an easy-to-read gage in durable and rugged housing

Modular sensor design allows user to select pressure measurement range for application flexibility

Simplified installation, comes in three different connection options, moveable dial with coloured markings

The Series DPG has a high ± 0.25% or ± 0.5% full-scale accuracy

1.5% full scale accuracy in a 2.5 in gage, performance and accuracy for pressure & vacuum applications up to 160 in W.C.

Dual English/metric scales with ±1.6% full scale accuracy

Stand-alone calibration standard for differential and gauge pressure sensors found in critical environments

40 VA to 150 VA, Single or Dual Hub, Circuit Breaker, UL Class 2

40 VA to 150 VA, Single or Dual Hub, Circuit Breaker, UL Class 2

Regulated 0.5 A, 1 A Fuse Protection

Regulated power supply, 24 VAC to 24 VDC, with adjustable output of 1.5 to 27 VDC.

Four galvanically isolated supply channels for 2-wire transmitters

Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive...

-1 to 1 mm, 78 mV/V/mm Output

-5 to 5 mm, 54 mV/V/mm Output

Designed for factory automation & a variety of industrial & commercial applications

0 to 13 mm, 0 to 10 Vdc Output

0 to 50 mm, 0 to 10 Vdc Output

0 to 100 mm, 0 to 10 Vdc Output

-5 to 5 mm, AC Output

0 to 200 mm, 0 to 10 Vdc Output

1 to 2 mm, 1 to 9 Vdc Output

Dual inductive, 2-wire AC/DC, maintains VDI/ VDE 3845 dimensions so positioners can be easily mounted on top of the sensor and target

Series DT Detector position sensor

Reliable, magnetically actuated, SS, completely interchangeable with competitive units

PM 2.5/10 Transmitter/Controller

Monitors 4 user-selectable size channels

Monitors 4 user-selectable size channels to allow for continuous monitoring

Particle counter monitors 2 or 4 user-selectable size channels to allow for continuous monitoring

Most feature advanced remote particle counter available, BACnet connectivity optional

Measures 0.3 μm to 25 μm particles with mass concentration and stores indoor air quality measurements of temperature, relative...

Measures 0.3 μm to 25 μm particles w/ mass concentration & stores indoor air quality measurements of temperature, relative humidity,...

Measures 0.3 μm to 25.0 μm with a flow rate of 0.1 CFM (2.83 LPM), available with BACnet

Integration is easy into a building automation and cleanroom management system via BACnet, Ethernet or (optional) Wireless

Measures 0.5 μm and 5.0 μm with a flow rate of 1.0 CFM (28.3 LPM), smallest remote particle counter in the market

An infrared sensor designed to automatically control an HVAC ventilation system

Automatically controls a HVAC ventilation system

Industrial Multimeters Waterproof (IP67) for Heavy-Duty Use

Non-Contact Voltage Detector with Adjustable Sensitivity

Clamp-On Digital mulitmeters

1 Rechargeable Battery Pack