Dwyer

Air filter kit for Series 2-5000 Minihelic® II gage

Mounting bracket for the Series 2-5000 Minihelic® II Differential Pressure Gage

Portable kit for Series 2-5000 Minihelic® II gage.

Stand-hang bracket, aluminum, for Minihelic® II gage.

Mounting panel for Magnehelic®

Air filter kit with (2) plastic open/close valves, (2) plastic static tips, tubing & mounting flange

Air filter kit with (2) plastic open/close valves, (2) 4" steel static tips, tubing & mounting flange

1/8" BSPT 316 SS filter vent plug (replacement filter for the A-464-SS)

3-piece magnet kit for mounting Magnehelic® gage directly to a magnetic surface, 3.3" x 1.7" x .5", .20 .lb

Plastic carrying case (7-9/16" x 5-7/8" x 2-13/16").

Weatherproof enclosure, ABS, compatible with Series 2000 Magnehelic®, DM-1000 DigiMag®, DM-2000, Series 605 (with -SS option),...

Plug-in humidity sensor.

Remote humidity/temperature sensor.

Portable Stand

Air filter kit for Series Mark II

"T" kit, accessory package for using pressure switch in conjunction w/ an air filter kit equipped Magnehelic® or Series 250 AF gages

Gage connector for 1/4" tubing, slip fits in 3/4" opening in 250 Series AF gages (compression nut and ferrule not included).

Gage connector, 1/8" pipe thread opening, less OD thd., for slip fit in 3/4" dia opening in 250 Series AF gages.

Scale clamp bar for 1221 manometer

Plastic envelope for inclined gages 170, 171, 172.

Plastic carrying case for portable inclined gages 109, 100.5, 104-6, 102, 102.5 - 13-1/2" x 10" x 2-3/8".

Temperature and humidity button data logger

Temperature button data logger

Plastic clips for BDL data logger

Wall mounting bracket for BDL data logger

Silicone waterproof enclosure, pack of 5

Docking station, interface cable.

Process Head without Display.

Shielded cable for Series ISDP, 9.8' (3 m)

Shielded cable for Series ISDP, 4.9' (1 m)

Aluminum DIN rail - only available in 1 m length (2.8 ft).

Female four pin M-12 to cable gland connector

DIN rail mounting kit, suitable for EN-50035, EN-50042, and EN 50022 rails.

Valve mounting bracket, for Hi-Flow control valves. (Series 2800 & 2900 only)

Muffler for pulse valve exhaust, 1/8" NPT, fits valve sizes 3/4", 1", 1-1/2" and RSV

USB adapter for calibration, PVC. *USB adapter necessary for calibration. One adapter can program multiple units.

2" NPT polypropylene side mount bracket

1" NPT polypropylene side mount bracket

4" Socket x 2” NPT reducer bushing fitting (Sch. 40), PVC

3" Socket x 2" NPT reducer bushing fitting (Sch. 40), PVC

2" Socket x 1" NPT reducer bushing fitting (Sch. 80), PVC

2" socket x 1" NPT reducer bushing fitting (Sch. 40), PVC

3" x 2" NPT reducer bushing fitting (Sch. 80), PVC

3" x 2" NPT reducer bushing fitting (Sch. 40), PVC

2" x 1" NPT reducer bushing fitting (Sch. 40), PVC

Galvanic barrier

78.7" shaft extension, flexible cable type for vertical installations only

39.4" shaft extension, rigid rod type