Dwyer

Replacement Sensor for 490W-6-HKIT

Sensing tape is 1" wide and can be bought in lengths

Sensing tape is 1" wide and can be bought in lengths

flex hose, 12" (30.48 cm) long, 1/8" male NPT connections

Tubing offers long life, great stability and resistance to corrosion

Sensors are for use with Manometers, Magnehelic® Gages, Pressure Switches and other Controllers

Sensors are for use w/Manometers, Magnehelic® Gages, Pressure Switches & other Controllers to pick up or sense static pressure drop...

Sensors are for use with Manometers, Magnehelic® Gages, Pressure Switches and other Controllers

Sensors are for use with Manometers, Magnehelic® Gages, Pressure Switches and other Controllers

Steel carrying case for portable draft gages 104-8, 104-10 and 48" and larger Slack Tube® manometers - 18-1/2" x 4-3/8" x 2-1/4".

Magnet assembly for 1222 manometers, 2 required (3 required for 1222-36 and M-1000).

Gage plug with retainer loop, polyethylene plastic, for 1/4" ID tubing, slip loop over tubing OD and insert plug for seal.

Pressure test plug adapter for the 490A-HKIT, 1/16˝ dia x 1-1/2˝ length (2 per kit)

Adapter fitting kit, includes pair of bleed fitting assemblies.

2 GB SD card

Dual USB wall or auto charger with international adapters. (1.0 A)

Thermo anemometer air velocity & temperature probe with coiled cable, 24" insertion length

Thermo anemometer air velocity & temperature probe with coiled cable, 18" insertion length

WM2/WMT2 2" BSPP to BSPT connector set

475-T AV telescoping pitot tube air velocity kit less manometer

Plastic carrying case with foam liner for 475-1-AV air velocity kit - 13-1/2" x 10" x 2-3/8".

Compression fitting connections, 1/8" tube to 1/8" NPT male

Replacement sensor, 4' cable

Configuration software

Precision resistor, 250 ohm

Protective rubber boot, 2.8" x 2.9" x 1.8", .35 lb.

Yellow Sliding Color Pointer

Red Sliding Color Pointer

Surface mount box for the Series RSME

Static pressure tip

Remote alarm annunciator with visible/audible alarm and acknowledge switch

6' (2 m) shielded cable with 5 pin female M-12 connections.

To use Dwyer flowmeters in remote applications where a reliable source of electricity is not available or practical

Power converter, plug-in, 115 VAC, 24 VDC, unregulated

WM2/WMT2 1/2" BSPP to BSPT connector set

WM2/WMT2 2" NPSM to NPT connector set

WM2/WMT2 1-1/2" NPSM to NPT connector set

WM2/WMT2 1" NPSM to NPT connector set

WM2/WMT2 3/4" NPSM to NPT connector set

WM2/WMT2 1/2" NPSM to NPT connector set

Replacement reed switch for WMH, WMT2, WNT and WPT.

1" male NPT with 90° elbow fitting (2) - PVC (Series LFME).

3/4" male NPT with 90° elbow fitting (2) - PVC (Series LFMD).

Instrument enclosure, 304SS, brushed finish, compatible with 2000 Magnehelic® gage

Weatherproof enclosure, ABS, compatible with Series 3000MR/MRS Photohelic®, Series 605 Magnehelic®, Series DH3 Digihelic®, Series...

1/8" male BSPT to 3/16" hose barb

Channel expander cable, 4 ft.

Channel expander cable, 2 ft.