Quick Links - Alpha Controls & Instrumentation Inc.
Social media
Contact information
Address
2900 John St.
Unit 4
Markham, ON L3R 5G3 - Canada
Phone
(905) 477-2133
Fax
(905) 477-4219
2900 John St.
Unit 4
Markham, ON L3R 5G3 - Canada
(905) 477-2133
(905) 477-4219
Designed to meet the highest demands for long-term stable & accurate relative RH & Temp.
Hand-held measuring device has been redesigned both visually & technically and offers a wide range of measuring options
Dedicated for the highly accurate measurement of low differential pressure
Base station for a network of up to 500 wireless transmitters for temperature, humidity and CO2
Provides precise and reliable measurement results even in the case of permanent high humidity
Measures accurately and reliably relative RH & Temp. & calculates all other humidity related parameters
High accuracy and long term stability at an outstanding price / performance ratio
Precise Rh & Temp. factory adjustment ensures a high accuracy of ±2% RH & ±0.3 °C (±0.54 °F)
Modular, compact design, thermal measuring principle and hot film sensor element
Thermal mass flow meter for compressed air and gases, 1/2 in (DN15) to 3 in (DN80) sizes available
Monitors compressed air, nitrogen, CO2 or other non-corrosive & non-flammable gases
Duct/immersion temperature sensor, passive or active output, measuring ranges up to 150°C (302°F)
Strap-on sensors are used for temperature measurement around ducts, pipes, passive or active outputs
Wall mounted for indoor & outdoor use, passive or active outputs, measuring range of -40°C - 70°C (-40°F - 158°F)
10 - 95% RH, operates on the fundamental dual-pressure reactor principle
Monolithic dew point sensor, auto-calibration, measuring range -60°C - 60°C (-76°F - 140°F) Td
Measuring range down to -60°C (-76°F) Td & outstanding price/performance ratio, Modbus RTU and 4 - 20 mA output
Dew point monitoring is essential for minimizing ownership costs of compressed air supply w/refrigeration dryers
Highly accurate measurement of water activity & Temp. & calculates the absolute water content in ppm
Suitable for in-line oil monitoring, high accuracy and long-term stability, with optional LCD display
Compact & rugged moisture in oil transmitter for inline oil monitoring, measures water activity, temp & water content
TFT touch screen and the built-in data logging function, ideal tool for fast and reliable oil analysis
Optimized for high accuracy up to 40 m/s (8000 ft/min), designed for industrial applications
Dual wavelength non-dispersive infrared technology (NDIR), auto calibration, ranges up to 10,000 ppm
Room wireless transmitter based on the IEEE 802.15.4 protocol w/a transmission frequency of 2.4 GHz
Very low air velocity, outstanding accuracy and long-term stability down to 0.15 m/s (30 ft/min)
Compact air velocity probe for HVAC applications, measuring range up to 20 m/s (4000 ft/min)
3 in 1 duct mounted transmitter (CO2, humidity, temperature)
Dedicated for accurate and reliable measurement in building automation and ventilation applications
Measures up to 3 physical quantities: relative humidity, temp & CO2
Miniature air velocity transmitter for measurement of lowest velocity
Dedicated for humidity and temperature measurement in explosion hazard areas
Cost optimised transmitter for industrial and high-end HVAC applications up to 120°C (248°F)
Humidity and temperature transmitter with interchangeable probes
Optimised for reliable humidity and temperature measurement in high-end meteorology applications
For accurate & long term stable measurement under continuous high humidity (>85 % RH)
Designed for HVAC, cost-effective, highly accurate transmitter for relative humidity and temperature
Designed for HVAC applications, IP65/NEMA 4 compact enclosure, outstanding price/performance ratio
Detects the danger of condensation on pipes, ducts and other surfaces before condensation actually occurs
High accuracy measurement of relative RH & Temp. in demanding climate control applications
Precise measurement of physical quantities, such as humidity, temp, dew point, CO2 & air velocity
High precision, optimized for accurate RH & Temp.measurement over a wide working range
Compact Rh & Temp. probes with excellent price/performance ratio, optimized for OEM applications
Interchangeable Humidity/Temperature Probes for OEM Applications
Accurate digital sensor with serial two-wire interface and a simple E2 protocol
High-end humidity and temperature transmitter up to 180°C (356°F) for demanding process control
E+E Elektronik specializes in the development and production of sensors for measurement of relative humidity, CO2, air velocity, mass flow and humidity calibration systems. E+E as a "designated laboratory" is commissioned to provide and further develop the national standard for humidity and air velocity.
