Digital transmitter for halogenated & natural refrigerants with Modbus RTU communications in IP66 housing
Measurements are fast and are performed directly in the process stream
Feature a LCD display of gas concentration, LED indication of each of the SPDT relays and TX/RX for the RS-485 or Modbus communications
Quickly and accurately measure carbon monoxide levels with easy-to-use compact meter
Integrates into BMS / BAS or refrigeration controllers, ASHRAE 15 / EN 378 safety standards
Designed to monitor levels of hydrogen gas in a room or a facility where hydrogen gas may be present
Class 1 Div 2, digital display of concentration, relay status, STEL, TWA and peak daily value of the gas detected
RS 485 communication protocol that accommodates 128 channels through four digital ports, Modbus is standard, BacNet optional
Provides carbon monoxide gas detection in residential, multi-family and commercial office environments – UL Listed, CSFM approved
Two wire transmitters, sensor elements have a typical life of two to three years and are easily field replaceable
Monitor and alarm against ingress of hazardous gas concentrations into air intakes of turbine engines and HVAC air ducts
Utilizes both digital and analog communications to interface with a maximum of 32 remote digital QEL transmitter/sensors, and 8 analog transmitter/sensors
Long range toxic gas detection up to 200ft (60m), high sensitivity and fast response, multiple output options
Advanced CO and temperature monitor in ambient air or gas stacks
Ergonomic, hand-held instrument for measuring carbon monoxide levels in breathing air tanks for diving
Provides continuous monitoring for combustible hydrocarbon gases, 7-200m detection range, built in event recorder
Provides combustible / heating gas detection in residential, multi-family and commercial office environments
Interference-free, drift-free TDL technology offers better process control and lower maintenance costs
Utilizes digital communications to interface with a maximum of four remote digital QEL transmitter/sensors
Remote gas transmitter for halogenated & natural refrigerants with 3 relays, 1 analog output & digital Modbus RTU communications
Sensor life of over ten years, includes a digital display, three user configurable relays, buzzer, horn/strobe output and non-intrusive calibration
Measurement accuracy down to 5 Vol. ppm in gas, outstanding signal stability and reduces maintenance efforts
May be used as a stand-alone detector and controller and as an analog transducer for use with the DVP-120 and other systems
Xenon flash technology, detects wide range of gases, fast response, withstand severe environmental conditions
Utilizes catalytic pellistor bead technology, sensor is resistant to poisoning substances, explosion-proof housing rated Class 1, Division 1, Groups A, B, C, and D
Measures indoor air quality, includes sampling probe with hose, stores up to 255 sets of readings for future evaluation
Provides automatic feedback and fan or valve control that can help reduce combustible gas concentrations
Compact size carbon monoxide meter for measuring and displaying the presence of CO on its digital display
Designed to meet specifications for safety in enclosed parking garages, including the uniform building code and OSHA 50ppm CO requirements
Provides combustible / heating gas detection in residential, multi-family and commercial office environments
Robust, low cost, analog output, sensor elements have a typical life span of two to ten years
Can be used as a stand-alone detector and controller or as an analog transducer for use with control panels and other systems
Standard LCD display, push-button programming and on-board meter jacks, 4-20 mA DC or 2-10 VDC
Transmitter for halogenated and natural refrigerants with 3 relays, 1 analog output and digital Modbus RTU communications
Designed for best performance at the ppm level, they are easy to maintain and allow for high operational availability
Feature a LCD display of gas concentration, LED indication of each of the SPDT relays and TX/RX for BACnet communications
Detects with the sensitivity and accuracy of infrared, but at the cost of older sensor technologies
Compact portable unit detects both refrigerants and combustible gases
Thermal Imager with MultiSharp™ Focus and the added feature of SF6 gas detection. Get the analysis you need anytime, anywhere
Make leak detection across a wide range of refrigerants quick and easy with this state-of-the-art refrigerant leak detector
Small, easy to operate tool to detect all combustible gases with excellent sensitivity and clear identification
Ultra-versatile ultrasonic system used for both gas leak detection and mechanical inspection/troubleshooting
Top-of-the-line tool used for both leak detection and mechanical PPM/inspection/troubleshooting
Low-cost handheld and widely versatility ultrasonic detector
Small, easy to operate tool to detect all combustible gases with excellent sensitivity and leak qualtification ability
Industrial-grade analyzer detects 40 of the most commonly used refrigerant gases